Research on the Synthesis of Sintered Bricks Using River Sludge for the Resource Utilization

Xia Yan

2015-01-01

Abstract:In order to achieve the comprehensive utilization of river sludge,environmental friendly bricks were synthesized by the traditional sintering process using river sludge as the raw material. X-ray diffraction(XRD),X-ray fluorescence spectrometer(XRF) and scanning electron microscopy(SEM) tests were used to characterize the phase,microstructure,morphology and chemical composition of the sludge and sintered brick. The results indicated that the optimal sintering temperature was 900 ℃. When sludge content is lower than 40%,the shrinkage rate of sintered brick is less than 15%,which can meet the national standard of GB5101—2003 Sintered bricks. Moreover,the addition of the moderate amount of aggregates will be helpful to improve the strength of the sintered brick. When the composition consists of 60% clay,20% sludge and 20% pebble,the sintered bricks have the superior performance in terms of the high compressive strength(31.6 MPa) and low shrinkage percentage(7.5%).