Abstract:Manufacturing and processing industries usually consume large quantities of materials and energy in the course of their operations. The energy supplied for high-temperature processes are used partially for the actual technical process and between 30 to 40% of the energy escapes through the walls of the reactor into the atmosphere, leading to a high degree of thermal inefficiency and fuel consumption. This paper studies the thermal behaviour of insulating refractory bricks produced from a blend of fireclay and agroforestry wastes. The fireclays used were obtained from Ukpor deposit in Anambra State (Latitude 5.95°N, Longitude 6.92°E), Osiele deposit in Abeokuta, Ogun State (Latitude 7.18°N, Longitude 3.45°E) and Kankara Katsina State (Latitude 11.93°N, Longitude 7.41°E), all of which are in Nigeria. Samples were prepared with various weight percentages (60–100 wt.%) clays and (0–40 wt.%) of agroforestry waste, with grain sizes between 212 and 600 μm. Raw materials and the developed refractory bricks were characterised using appropriate standard techniques. The chemical, mineralogical constituents and phases present in the microstructure were examined. Physical and thermo-mechanical properties were investigated. The insulating refractory bricks developed have porosity of 78.83% , cold crushing strength (CCS) 3.144 kN/m2 and thermal conductivity 0.04–0.046 W/(m∙K) that compare favourably with imported bricks 75–85%, 2.756 kN/m2 and 0.049 W/(m∙K) in both physical, mechanical and thermal properties respectively. The reason is that the agroforestry waste used (coconut shell), served to create the pores that improve insulation after burning. Also the ash that remains serves as reinforcement to improve the mechanical properties. The thermal behaviour of the bricks was studied using Finite Element Method and shows a strong correlation with the experimental findings. This indicates that the produced insulating bricks have the thermal properties required for insulation of furnaces.

The Use of Urban River Sediments As A Primary Raw Material in the Production of Highly Insulating Brick

Utilization of river sediment, sewage sludge and wheat straw as the primary raw material in sintered-shale bricks

Resource Utilization of the Dredged Material of Urban river to Manufacture Sintered Brick

Utilization of Sandy Soil as the Primary Raw Material in Production of Unfired Bricks

Developing fired clay bricks by incorporating scrap incinerated waste and river dredged sediment

Recycling of sewage sludge in clay-free thermal insulation brick: assessment of microstructure, performance, and environment impact

Research on the Synthesis of Sintered Bricks Using River Sludge for the Resource Utilization

Preparation and Mechanism of the Sintered Bricks Produced from Yellow River Silt and Red Mud.

Investigation of mechanical and thermal performances and masonry quality for new raw soil-based insulating hollow bricks

Using water-based drilling cuttings from shale gas development to manufacture sintered bricks: a case study in the southern Sichuan Basin, China

Newly Generated Ca-Feldspar during Sintering Processes Enhances the Mechanical Strength of Coal Gangue-Based Insulation Bricks

Pervious Concrete with Secondarily Recycled Low-Quality Brick-Concrete Demolition Residue: Engineering Performances, Multi-Scale/phase Structure and Sustainability

Microstructure Evolution and Improved Permeability of Ceramic Waste-Based Bricks

Humidity-Controlling Ceramic Bricks: Enhancing Evaporative Cooling Efficiency to Mitigate Urban Heat Island Effect

A Simulation and Experimental Investigation of the Thermal Characteristics of Refractory Bricks Produced Using Fireclay and Agroforestry Wastes

Preparation, characteristics and mechanisms of the composite sintered bricks produced from shale, sewage sludge, coal gangue powder and iron ore tailings

Utilization of industrial wastes in non-sintered bricks: microstructure and environmental impacts

Production and characterization of natural clay-free green building brick materials using water treatment sludge and oak wood ash

Lightweight bricks manufactured from ground soil, textile sludge, and coal ash

Utilization of Drinking Water Treatment Sludge with Coal Fly Ash to Make Permeable Bricks for Low Impact Development

Recovering Untreated Phosphorus Tailings and Coal Gangue to Prepare Ceramic Lightweight Bricks