Abstract:Asphaltene and resin can form microscale colloids; in the literature, their content is the key to heavy oils' viscosities. However, our recent experimental results indicate some heavy oil samples with the same content of asphaltene and resin have a 2 × discrepancy in terms of their viscosities, which cannot be explained by previous work. In this paper, we hypothesize that this discrepancy corresponds to the total content of low-concentration compounds. We present the molecular configuration and interactions of heavy oil using a combination of atomic force microscopy (AFM), gas chromatography–hydrogen flame-ionization detection tests, and molecular dynamics simulations. With the improvement of experimental accuracy, we found that 7089 of 7376 detected compounds in a heavy oil sample had a low concentration of <0.05 % (mol/mol). These compounds could form nanoscale aggregations (radius <10 2 nm) as a continuous network with a substantial surface area of ∼150 nm 2 /92 nm 3 . AFM and scanning electron microscopy–energy-dispersive X-ray spectroscopy results indicate that the surface area of heavy oil was 10 3 greater than that of light oil. Simulation results indicate that the calculated molecular diffusion of each detected compound differed. Thus, the intermolecular interactions on these surface areas are the main contributors to internal friction during flow. Our experimental results reveal the substantial impact of low-concentration compounds on the measured viscosity. These findings are the first to present the importance of low-concentration compounds on the viscosity of heavy oil, and will facilitate the development of viscosity reducers for lowering the low-concentration compounds' surface areas.

Synthesis and Application Performance of Viscosity Reduction Additive to Super-Viscous Crude Oil

Viscosity Modification of Lubricating Oil Based on High-Concentration Silica Nanoparticle Colloidal System

Research and performance evaluation of CO2 solubilization synergist for heavy oil

STUDY ON DRAG REDUCTION PROPERTY OF FLOW IMPROVERS FOR SUPER-VISCOUS CRUDE OIL

Study on the Viscosity Reduction of Liaohe Extra-Viscous Crude Oil

Quadripolymers As Viscosity Reducers for Heavy Oil

Aminated Copolymers As Flow Improvers for Super-Viscous Crude Oils

Double Alkyl Chain Copolymers As Flow Improvers for Heavy Oil

A Study on Viscosity Reduction of Liaohe Super-Heavy Crude Oils through Emulsification in Water

Synergistic emulsification of polyetheramine/nanofluid system as a novel viscosity reducer of acidic crude oil

Synthesis and Application of a Spirocompound as Clean Viscosity-Reducer for Crude Oil

Novel Terpolymers As Viscosity Reducing Agent for Tahe Super Heavy Oil

Synthesis and Viscosity Ruducing Ability of SL Series Tercopol ymers of Long Chain Alkyl Acrylate for Extra-Heavy Crude Oils

Effect of a new nano‐viscosity reducing agent on the rheological properties and wax deposition characteristics of waxy crude oil

Effective viscosity prediction of crude oil-water mixtures with high water fraction

Synthesis and Molecular Dynamics Simulation of Amphiphilic Low Molecular Weight Polymer Viscosity Reducer for Heavy Oil Cold Recovery

Shear Strengthening Viscosity of a Shengli Crude Oil

Experimental and simulation insights on the high viscosity of heavy oil I: Low-concentration compounds

A viscosity reduction study on chinese extra heavy oil by the addition of synthesized novel oil-soluble viscosity-reducing agents

Preparation and Application of a New Viscosity-reducing Agent for Crude Oil

Synthesis of Alkyl Aliphatic Hydrazine and Application in Crude Oil as Flow Improvers