Abstract:The SC200 cyclotron is the critical component of the proton therapy system, which is being jointly developed by the Institute of Plasma Physics Chinese Academy of Sciences (ASIPP), Hefei, China, and the Joint Institute for Nuclear Research (JINR), Dubna, Russia. It is an isochronous cyclotron to accelerate H+ ions and extract proton beam energies of 75-200 MeV with the maximum beam intensity of 1 mu A. The maximum magnetic field intensity of the SC200 cyclotron is 4.6 T, and the accuracy of measurements for the average isochronous field is required to be better than 10(-4). The magnetic gap decreases from 37 mm at cyclotron center to 9 mm at the pole edge. Hence, the difficulty of designing a magnetic field measurement system is increased because of the required magnetic field accuracy and the narrow gap between the poles. A measurement system has been developed to measure the magnetic field distribution in the median plane of the cyclotron by the SENIS Hall probe. After the Hall probe is calibrated by NMR, the measurement accuracy can reach +/- 4 x 10(-4) under the magnetic field intensity of 5 T. The position of the Hall probe will be monitored by grating and optical encoder, respectively, so as to ensure its correct positions. To verify the performance of the mapping system, it has been tested in the SC200 cyclotron with the designed vacuum degree. The test results showed that the mapping system can run smoothly and meet the measurement requirements of the SC200 cyclotron.

USING ONE-DIMENSIONAL HALL PROBE TO MEASURE THE SOLENOID MAGNET FOR CSNS/RCS

Design and Measurement of Dipole Magnets for CSNS 1.6GeV RCS

Study on the magnetic measurement results of the injection system for CSNS/RCS

The Design and Initial Testing of the Beam Phase and Energy Measurement System for DTL in the Proton Accelerator of CSNS

The design and construction of CSNS drift tube linac

High-precision positioning of Hall probes for SCU magnetic field measurement

Design of a Μsr Spectrometer with Ultrahigh Arrays at China Spallation Neutron Source

A New Muon-Pion Collection and Transport System Design Using Superconducting Solenoids Based on CSNS

Developing the Technique of Measurements of Magnetic Field in the CMS Steel Yoke Elements With Flux-Loops and Hall Probes

The Development of Magnetic Field Measurement System for Drift-Tube Linac Quadrupole

Development of a prototype bump magnet for csns \ rcs injection

Linac Construction for China Spallation Neutron Source

Design of a $μ$SR spectrometer with ultrahigh arrays at China Spallation Neutron Source

Preliminary Design of CSNS-II Linac SRF LLRF

Design and Research of Magnetic Field Mapping System for SC200

Development of a prototype kicker magnet for csns\rcs extraction

Status of the Beam Instrumentation System of CSNS

A Preliminary Feasibility Study of Measurement of Quadrupolar Beam Oscillations at CSNS RCS

Design of the First Μsr Spectrometer at China Spallation Neutron Source

Development of the double spoke cavity prototype for CSNS-II

The Design of Magnetic Field Measurements System for CYCIAE-100