Abstract:A 4th generation ECR (electron cyclotron resonance) ion source FECR (first 4th generation ECR ion source) is under construction at IMP (Institute of Modern Physics). Aiming to be operated with the microwave power of 20 kW at 45 GHz, a fully superconducting Nb 3 Sn magnet is to be developed to realize the optimum ECR plasma confinement. As the first superconducting ECR magnet that utilizes single-strand Nb 3 Sn (niobium three tin) wire for the winding of coils consisting of 4 sets of axial solenoids and one sextupole, it poses many challenges in the coil fabrication, cold mass assembly, magnet quench protection, and so on. With a shell-based structure and bladder-and-key technology, we have completed a 1/2-length FECR cold mass prototype. It has been fully tested when immersed in 4.2 K liquid helium. The critical issue in this work is to keep the brittle Nb 3 Sn wire safe during the complicated mechanical process and protect it against the high current high magnetic field excitation. In this paper, we will report on the details of how to design, fabricate, assemble, and test a high-performance Nb 3 Sn sextupole with the existence of sophisticated magnetic fields and stresses. The successful test of a high-current sextupole coil in a so-called mirror structure will be reported. The application of the bladder-and-key structure to the prototype and the performance will be presented. This research has also tackled the solutions to mitigate very intense flux jump that has caused severe challenges to quench detection and protection.

Development of a prototype kicker magnet for csns\rcs extraction

Physical and Structural Design of Fast Extraction Kickers for CSNS/RCS

Development of a prototype bump magnet for csns \ rcs injection

Design and Measurement of Dipole Magnets for CSNS 1.6GeV RCS

Development of a High-repetition-rate Lumped-inductance Kicker Magnet Prototype for the Beam Switchyard of SHINE

Study on the magnetic measurement results of the injection system for CSNS/RCS

Prototype of repetitive pulsed power supply for the RCS beam extraction kicker in the CSNS upgrade

Development of the double spoke cavity prototype for CSNS-II

The vibration research of the AC dipole-girder system for CSNS/RCS

Design and Characterization of a Kicker for the Tsinghua Thomson Scattering Storage Ring

China spallation neutron source design∗

Research and development of the high precision low field dipole magnet for CEPC Booster

Design and performance of LLRF system for CSNS/RCS

Study the vibration and dynamic response of the dipole girder system for CSNS/RCS

The compensation for the edge focusing of chicane bump magnets by harmonic injection in CSNS/RCS

The Superconducting Magnet for ADS Injection-I

Research and development for injection system of HLS storage ring in NSRL Phase Ⅱ Project

USING ONE-DIMENSIONAL HALL PROBE TO MEASURE THE SOLENOID MAGNET FOR CSNS/RCS

Development of dual-harmonic RF system for CSNS-II

Development of a 1/2-length prototype high field Nb3Sn magnet for the 4th generation ECR ion source

Model and Analysis of Eddy Current of Ferrite-dominated Kicker Magnet in Hefei Light Source Ring