Abstract:Focusing on cavitation phenomena caused by high-speed submerged water jets, this paper presents an improved cavitation model for a compressible fluid mixture based on a concise estimation of fluid compressibility that considers phase change effects. The homogeneous two-phase flow assumption is adopted, and the gas phase is assumed to consist of vapor and non-condensable components. Equations of state for a pure liquid and an ideal gas are employed to evaluate the compressibility of the liquid and non-condensable components, and the compressibility of the vapor is treated semi-empirically as a constant. The model is embedded in an unsteady Reynolds-averaged Navier–Stokes solver, with the realizable k-ε model employed to evaluate the eddy viscosity. The turbulent cavitating flow caused by an impulsively started submerged water jet is treated. The pattern of periodic cavitation cloud shedding is acceptably captured, and the mass flow rate coefficient and its fluctuation frequency evaluated by simulations agree with the experimental results well. The validity of the proposed method is confirmed. The results reveal that cavitation occurs when pin/Pin reaches 0.65 and fluid flow begins to pulsate. In the well-developed stage, the leading cavitation cloud and a subsequent cloud are successively shed downstream, and this process is repeated. The subsequent cloud catches the leading cloud, and they coalesce in the range x/d≈ 2–3. The pressure fluctuations concentrate in the range of x/d≈2–5 corresponding to the periodic shedding of cavitation clouds. The mass flow rate coefficient pulsates from 0.59–0.66 under the effect of cavitation.

A Thermodynamic Cavitation Model for Cavitating Flow Simulation in a Wide Range of Water Temperatures

Cavitating Flow Simulation for High Temperature Water Based on Thermodynamic Effects

Cavitation Simulation with Consideration of the Viscous Effect at Large Liquid Temperature Variation

Numerical Simulation of Cavitation Flow under High Pressure and Temperature

A Thermodynamic Cavitation Model Applicable to High Temperature Flow

On the Validation of the Cavitation Model Considering the Thermodynamic Effect of Cavitating Flow

Modeling cavitating flow in high temperature water

Prediction of Cavitation Performance of a Hydrofoil in Water at High Temperatures

A Cavitation Model Considering Thermodynamic and Viscosity Effects

THE IMPROVEMENT AND NUMERICAL APPLICATIONS OF A THERMODYNAMIC CAVITATION MODEL

Modeling Cavitation Flow of Cryogenic Fluids with Thermodynamic Phase-Change Theory

Numerical Simulations of Cavitation Flow Around a Hydrofoil with Consideration of Thermal Effects

Numerical Analysis Of Airfoil Naca0015 And Centrifugal Pump'S Cavitation Characteristic Based On The Thermodynamic Effects

A new cavitation model based on evaporation and condensation theory

Numerical Analysis of Hydrofoil Naca0015'S Cavitation Characteristics Based on the Thermodynamic Effects

Modeling liquid hydrogen cavitating flow with the full cavitation model

Temperature depression model for cavitating flow with thermodynamic suppression effect in high-temperature water

Cavitation model with non-condensable gas effect and its numerical simulation

Analysis of Ventilated Cavitation Around A Cylinder Vehicle with Nature Cavitation Using A New Simulation Method

Numerical simulations of cavitating water jet by an improved cavitation model of compressible mixture flow with an emphasis on phase change effects