Abstract:The research makes the analysis of cavitating flow field around hydrofoil NACA0009 through both experiments and numerical simulations. We previously proposed an interface effect-based correction model (IE model) for turbulent viscosity correction of cavitation flow, which performed well for hydrofoil cavitation simulation at small angles of attack. This research makes a further evaluation of the IE model. Firstly, the cavitation experiments of the NACA0009 blunt trailing edge hydrofoil with a 10-degree angle of attack are carried out on a closed test platform. The images of quasi-periodic shedding of partial cavitation are obtained. Secondly, the standard k-ε turbulence model, the IE model, and the large eddy simulation (LES model) are used to reproduce the cavitation flow around the hydrofoil. The results show that the standard k-ε model over-predicts the turbulent viscosity of the flow field, resulting in the cavitation region stably attached to the leading edge of the hydrofoil, which can't simulate the unsteady characteristics of the cavity bubbles. The LES model successfully reproduces the process of cavitation structure quasi-periodic shedding off. The IE model modifies the turbulent viscosity in the high shear flow region so that the reentrance flow can reach the leading edge of the hydrofoil and cut the attached cavity off. IE model can properly simulate the macro features of the cavity and the shedding frequency. In each stage of cavitation periodic shedding, the results of the IE model and the LES model on the pressure distribution and velocity field are consistent well. In addition, the calculation time cost of the IE model is basically the same as that of the standard k-ε model, only 0.14 times the LES model costs. The IE model is more suitable for cavitation evaluation in engineering applications.

Prediction of Cavitation Performance of a Hydrofoil in Water at High Temperatures

Numerical Simulation of Cavitation Flow under High Pressure and Temperature

Numerical Simulations of Cavitation Flow Around a Hydrofoil with Consideration of Thermal Effects

Numerical Analysis of Hydrofoil Naca0015'S Cavitation Characteristics Based on the Thermodynamic Effects

Cavitation Simulation with Consideration of the Viscous Effect at Large Liquid Temperature Variation

A Thermodynamic Cavitation Model Applicable to High Temperature Flow

Modeling cavitating flow in high temperature water

Numerical Simulation of Cavitation Characteristic Around Hydrofoil NACA0015

A Thermodynamic Cavitation Model for Cavitating Flow Simulation in a Wide Range of Water Temperatures

Cavitating Flow Simulation for High Temperature Water Based on Thermodynamic Effects

On the Validation of the Cavitation Model Considering the Thermodynamic Effect of Cavitating Flow

A Cavitation Model Considering Thermodynamic and Viscosity Effects

The Effect of Cavitation on the Hydrofoil Dynamic Characteristics

Numerical Analysis Of Airfoil Naca0015 And Centrifugal Pump'S Cavitation Characteristic Based On The Thermodynamic Effects

Numerical Simulation Of Unsteady Flow Characteristics For Cavitation Around A 3-D Hydrofoil

Numerical Simulation of Cavitation-Erosion on a Plane-Convex Hydrofoil Using a Homogeneous Mixture Assumption

Numerical Evaluation of Cavitation Void Ratio Significance on Hydrofoil Dynamic Response

Numerical prediction of cavitation nuisance on hydrofoils: Combined analysis of cavity dynamics and the aggressiveness of collapsing cavitating structures

Evaluation of a modified URANS prediction of unsteady cavitating flow around a hydrofoil by comparing with LES results and experimental results

Modeling liquid hydrogen cavitating flow with the full cavitation model

Numerical Simulation of Dynamic Characteristics of Hydrofoil Structure under Cavitation Conditions