Abstract:The physical mechanism of flow unsteadiness is one of the key problems in cavitating flow. Significant efforts have been exerted to explain the cavitation-vortex interaction mechanism. As well, the process of kinetic energy transport during the evolution of unsteady cavitating flow must be elucidated. In this work, 2D calculations of cavitating flow around a NACA66 hydrofoil were performed based on the open source software OpenFOAM. The modified shear stress transport k-ω turbulence model, which considers curvature and turbulent eddy viscosity corrections, was employed to close the governing equations. The Schnerr-Sauer cavitation model was adopted to capture the cavitation phase change process. Numerical results showed reasonable consistency with the results of the experiments conducted by Leroux et al. (2004). The results showed that cavitation promotes turbulence intensity and flow unsteadiness around the hydrofoil. During the attached sheet cavity growth stage, high-value regions of turbulent kinetic energy are located substantially at the interface of the cavity, particularly at the rear portion of the cavity region. During the cloud cavity shed-off stage, the cavity begins to break off and the maximum value of turbulent kinetic energy is observed inside the shed cavity. Finally, the influence of cavitation on the turbulence intensity is illustrated using the turbulent kinetic energy transport equation, which shows that the pressure diffusion and turbulent transport terms dominate as cavitation occurs. In addition, cavitation promotes turbulence production and increases dissipation with fluid viscosity and flow unsteadiness. The viscous transport term only acts in the cavitation shedding stage under large-scale vortex shedding. Overall, these findings are of considerable interest in engineering applications.

Numerical Analysis of Hydrofoil Naca0015'S Cavitation Characteristics Based on the Thermodynamic Effects

Numerical Simulation of Cavitation Characteristic Around Hydrofoil NACA0015

Numerical Simulation of Cavitation Flow under High Pressure and Temperature

Numerical Analysis Of Airfoil Naca0015 And Centrifugal Pump'S Cavitation Characteristic Based On The Thermodynamic Effects

A Thermodynamic Cavitation Model Applicable to High Temperature Flow

Numerical Simulations of Cavitation Flow Around a Hydrofoil with Consideration of Thermal Effects

Prediction of Cavitation Performance of a Hydrofoil in Water at High Temperatures

Cavitation Simulation with Consideration of the Viscous Effect at Large Liquid Temperature Variation

Numerical simulation of flow and heat transfer in journal bearing lubrication

A new cavitation model based on evaporation and condensation theory

Numerical Analyses of Ventilated Cavitation over a 2-D NACA0015 Hydrofoil Using Two Turbulence Modeling Methods

On the Validation of the Cavitation Model Considering the Thermodynamic Effect of Cavitating Flow

THE IMPROVEMENT AND NUMERICAL APPLICATIONS OF A THERMODYNAMIC CAVITATION MODEL

Numerical Evaluation of Cavitation Void Ratio Significance on Hydrofoil Dynamic Response

A Thermodynamic Cavitation Model for Cavitating Flow Simulation in a Wide Range of Water Temperatures

Numerical study on the cavitation instability from the perspectives of pressure change and hydrodynamics evolution in the cavitating flow over a hydrofoil

A Cavitation Model Considering Thermodynamic and Viscosity Effects

Calculation of Cavitation Evolution and Associated Turbulent Kinetic Energy Transport Around a NACA66 Hydrofoil

The Effect of Cavitation on the Hydrofoil Dynamic Characteristics

Numerical Simulation of Dynamic Characteristics of Hydrofoil Structure under Cavitation Conditions

Experimental and numerical study of ventilation cavitation around a NACA0015 hydrofoil with special emphasis on bubble evolution and air-vapor interactions