The Technology of the Program Re-develop on Pro/ENGINEER Software System

Kuang Ji-yong

2001-01-01

Abstract:Pro/TOOLKIT is a user's toolbox of Pro/ENGINEER Software System, it provide a no seam link to Pro/ENGINEER Software, this paper presents it's run way control technology, and program compile step, this job will make convenient to Pro/ENGIN'EER Software 's re-develop application.

What problem does this paper attempt to address?

Development of Computer Aided System for Cam Based on Pro/TOOLKIT

ZHANG Ji-chun,XU Bin,LIN Bo

DOI: https://doi.org/10.3969/j.issn.1003-0794.2006.05.039

2006-01-01

Abstract:Pro/TOOLKIT is a second develop toolbox of Pro/ENGINEER software.The key technology was first discussed,then under Visual C++ 6.0 environment,a computer aided system for cam profile was developed with blocking method.With this system,cam with many type profiles can be designed and this system has a good character of versatility and integration.
An Integrated Point- Data Processing System in Reverse Engineering

YE Yongdong,YE Xiaoping,JIN Tao

DOI: https://doi.org/10.3969/j.issn.1005-2402.2006.11.017

2006-01-01

Abstract:An integrated reverse engineering system has been developed. It makes the points-data processing system as a data adapter between the digitized device and the commercial CAD/CAE/CAM software. The digitalization manner, scanning path plan and sample points will be defined by final application based on the integrated system. And the measured points can directly generate NC code and STL file via the data adapter. Another alternative is 3D object reconstruction; the work also depends on the downstream process. The integrated approach can reduce the scanning and modeling time, create the unite model and adapt to various applications. The technology has been integrated with the current commercial CAD systems and is proved valid by practically application.
An off-line programming system for robotic drilling in aerospace manufacturing

Weidong Zhu,Weiwei Qu,Lianghong Cao,Di Yang,Yinglin Ke

DOI: https://doi.org/10.1007/s00170-013-4873-5

IF: 3.563

2013-01-01

The International Journal of Advanced Manufacturing Technology

Abstract:Off-line programming systems are essential tools for the effective use of robots in the manufacturing environment. This paper presents a dedicated off-line programming system for robotic drilling in aerospace manufacturing. Following a brief introduction of the system architecture, the paper discusses two major problems of off-line programming for robotic drilling, i.e., redundancy resolution and position correction. A new performance index is proposed for the combined requirements of singularity and joint-limit avoidance, followed by a discussion of the redundancy resolution scheme by using numerical optimization at the joint displacement level. A position correction method using measurement data of reference holes is developed for the enhancement of robotic drilling accuracy. Robot programs generated by using the developed system have been tested on a robotic drilling system, and the experimental results are provided.
Study on Offline Programming of Industrial Robot for Cutting Process

LIU Chu-hui,YAO Bao-guo,KE Ying-lin

DOI: https://doi.org/10.3785/j.issn.1008973x.2010.03.003

2010-01-01

Abstract:An off-line programming method and relevant parameter resolution process were proposed to economically enhance the efficiency of industrial robot which used for light cutting of aerospace aluminum alloy during digital airplane assembly. Based on automatic programming tool(APT) cutter location source files and interface programs,the cutter location data from CAD/CAM system were integrated into the robot programming system. According to robot control requirements,cutter location information was transformed into the move path of end effecter and the robot program by post processing. Finally a kinetic emulation module was used to validate the robot program. The results of example showed that this method is effective for control program generation of complex workpiece light cutting process using industrial robot,and the programming efficiency is significantly improved compared with the teaching programming method.
Programming Based on Pro /TOOLKIT Asynchronous Mode

李德林,徐海波

DOI: https://doi.org/10.3969/j.issn.1002-6886.2009.05.021

2009-01-01

Abstract:Firstly this paper introduces the meanings of synchronous mode and asynchronous mode,and analyses the differences between them to obtain the advantages and disadvantages respectively.Then this paper presents a detailed introduction of the asynchronous mode development steps to the Pro/ENGINEER Wildfire 4.0,which is based on the Visual Studio 2005 as the development environment.Finally an example is given to illustrate the results of asynchronous mode development.
A Piston Mold CAD Intelligent System Based on Pro/Engineer

JI Ming-tao,YIN Fei,WANG Guo-xiang,WANG Xi-dong,YANG Jiang-bo,LE Shu-hua

DOI: https://doi.org/10.3321/j.issn:1001-4977.2001.01.010

2001-01-01

Abstract:Aiming at the present situation that the secondary development upon the available general CAD system severely lags behind the increasing popularization of the application of CAD system in our country, this paper, combining with the piston mold CAD Intelligent system developed by the author, detailed demonstrates the procedure of the secondary development upon Pro/Engineer using VC6.0 IDE and the development module-Pro/Toolkit, which is an aspiring and efficient exploration in creating a practical CAD system based on Pro/Engineer.
Development of Pro/E Post-Processing System Based on Parallel Machine Tool

杨晓钧,钟诗胜,王知行,魏永庚

DOI: https://doi.org/10.3321/j.issn:1003-8728.2004.12.024

2004-01-01

Abstract:General cutter-location post-processing system can not generate the NC instruction for parallel machine tool because of its special structure. We developed a Pro/E post-processing system based on parallel machine tool for solving the problem of programming difficulty for parallel machine tool. The post-processing procedures and related algorithm are given.
Development of Interactive Pro/E Standard Parts Library Based on Coordinate Transformation

Yan Zhongsheng,Gong Chunquan,Mei Qiongfeng

DOI: https://doi.org/10.3969/j.issn.1000-4998.2010.02.007

2010-01-01

Abstract:In the development of interactive standard parts library,the standard parts are assembled on the location that the user has chosen with the coordinate transformation method.This standard parts library has been developed on the platform of Pro/E with the aid of Visual C++ programming environment and the functions provided by Pro/Toolkit.There is less relation between the parent feature and child feature in the generated assembly and it is easy for future redesign.As a result,the designer' s workload will be greatly reduced with this software.
The Development of Gear CAD Based on Pro/TOOLKIT and SQL2000

Xiang-qiang ZHONG,Li-tao WANG,Da SHU

DOI: https://doi.org/10.3969/j.issn.1006-3269.2009.01.013

2009-01-01

Abstract:The design idea and the development process of the parametric design system is discussed through the research of gear modeling in this paper.Then,the parametric system of gear CAD is built by use of Visual C++ 6.0 and SQL Server 2000 based on Pro/Engineer,through which the designers working efficiency and enterprise efficioucy could be improved.
Computer Aided System Development for Complex-shaped Part and Tool Design

Jiang Hao,Xu Yongchao,Zhu Shiqiang

2010-01-01

Abstract:For the design of serialized parts with complex shape and the tool design,by the computer aided system,the design period can be shortened;the repetitive work can be reduced effectively for the designers.Based on UG,UG/Open development tool,Visual C++ and the knowledge of databas,a computer aided system is established,which makes the part design and the tool design visible and convenient.It has been found that the computer aided system runs well and can aid to accomplish the design effectively.
Development of Direct Slice Software on Three-Dementional Models Using Protoolkit

鄢国平,张华,胡瑢华,赵江

DOI: https://doi.org/10.3969/j.issn.1006-0316.2004.11.011

2004-01-01

Abstract:A novel direct slice method is proposed in the application of 3D-welding Rapid Prototyping Manufacting field. A dynamic linked brary is developed using ProToolkit in order to realize direct slice on three-dimensional model in the integration development environment of Pro/E.Moreover,an open interface is specially developed as well as slice data can be independent of Pro/E,accordingly,a multi-layer table data structure is devised to store details of the slices countours.
Development of intelligent standard parts library system based on Pro/E

LIU Wei,ZHOU Xiong-hui

DOI: https://doi.org/10.3969/j.issn.1001-4934.2012.02.003

2012-01-01

Abstract:On the Pro/E platform,based on the multi-layered parametric technology composed of component level,part level and feature level,through the integration of many secondary development technologies such as Pro/Toolkit,UDF and Pro/Program,the intelligent standard parts library system was constructed.This system can be compatible with the standard parts in part and assembly,meanwhile,by combination with the Pro/E assembly positioning,the functions such as the additional processing on the standard parts and automatic drilling are achieved so as to enlarge the application range of the intelligent standard parts library and improve its intelligentialize.
Using VB to Second Develop Pro/ENGINEER

ZHANG Ji-chun,YANG Jian-guo,XU Bin

DOI: https://doi.org/10.3969/j.issn.1001-2257.2006.04.024

2006-01-01

Abstract:A new method of using VB to second development Pro/ENGINEER based on Automation GATEWAY was discussed,provided some key functions,by the example of gear parametric design process, this method was proved to be very easy and useful.
RESEARCH ON KEY TECHNOLOGIES OF USER FRAME SYSTEM IN CAPP DEVELOPING TOOL

WANG Yun-li,DUAN Guang-hong,LIU Dan,MAO Wei,ANG Xian-kui,LIANG Hong-wei,BIAN Wen-guang

DOI: https://doi.org/10.3969/j.issn.1006-5911.2000.01.005

2000-01-01

Computer Integrated Manufacturing Systems

Abstract:The CAPP developing tool is a necessary method to realize commercial CAPP and CAD/CAPP/CAM integrated system. The CAPP developing tool proposed in this paper is composed of Constructive Tool System and User Frame System. Customers use the User Frame System to create process plan based on Constructive Tool System. It has the following functions: reading user system information template, reading and checking part information, creating process plan, outputting process documents and machining information. The key technologies of User Frame System are discussed in detail: manufacture feature class definition for all system features and user defined features, process sequence and optimization based on flexible process decision-making, process information operation based on part process structural tree. The CAPP developing tool has been used to realize two CAPP systems for non-rotational parts.
Study on Parameter Technology for Fixture Design Based on Further Development of Pro/ENGINEER

LIU Bai-yan,ZHANG Xu-tang,LIU Wen-jian,PENG Gao-liang

DOI: https://doi.org/10.3321/j.issn:0367-6234.2005.06.035

2005-01-01

Abstract:The main technologies of the fixture design based on further development of pro/Engineer are introduced, including insert standard parts based on Family Table, consumer custom parameter parts, and parameter assemble technologies. The system predigests the operation process for designer, and quickens the fixture assemble in Pro/E, While the parameter function quickens the design process. Though these development and research, the efficiency of fixture assembles is wholly improved.
Development of an interactive assembly-oriented Pro/E standard part library

YAN Zhong-sheng,MEI Qiong-feng,GONG Chun-quan,LI Qiang,MA Zhi-hui,SHEN Yu

DOI: https://doi.org/10.3969/j.issn.1001-3997.2009.10.089

2009-01-01

Abstract:An interactive assembly-oriented standard part library has been implemented successfully by using a Visual C++ environment and Pro/Toolkit functions,and it is supported by Pro/ENGINEER.It is a common assembly style to assemble numbers of standard parts in difference places on the same plane.This assembly mode can be realized by an interactive operation.On the standard part library,the design time can be reduced averagely from 20 minutes before to 1 minute at present,and it only costs about 3 seconds to generate a schedule of parts.It is clear that design efficiency was greatly improved,which have been proved by the customer.
Design of milling tool platform in mass customization

WAN An-ping,CHEN Jian-hong,LI Wei,SHENG De-ren

DOI: https://doi.org/10.3969/j.issn.1001-4551.2008.09.018

2008-01-01

Abstract:In order to achieve mass customization production to meet the low-cost mass production and customer's customization demand,based on Pro/ENGINEER software,a man-machine interactive platform for milling tool library was developed by comprehensively using visual interface design and secondary development tool kit of Pro/Toolkit,technology of 3D solid modeling and size parameter-driven were used to establish tool model library,and Access was used to parameters table of tool library.The platform makes tool design and call achieve standardization by access external tool database,which allows users to design products for mass customization.
DESIGN FOR ROBOTIC ARC WELDING OFF-LINE PROGRAMMING AND SIMULATION SYSTEM

He Guangzhong,Gao Hongming,Wu Lin

DOI: https://doi.org/10.3969/j.issn.1001-1382.2006.02.005

2006-01-01

Abstract:This paper presented a new method to develop the robotic arc welding off-line programming system which adopted the advanced modeling system SolidWorks as the running platform, and with this method a more functional off-line system was developed. In this paper the functional modules of the system were divided and the planning techniques in the welding application were particularly introduced.
Application Study on Virtual Prototyping Technology in the Field of Geological Engineering Machinery

QU Ye-gao,BU Chang-gen,LI Jin-feng

DOI: https://doi.org/10.3969/j.issn.1672-7428.2006.11.013

2006-01-01

Abstract:Based on the virtual prototyping technology and the geological machinery design actuality,the necessity of virtual prototyping technology application in geological engineering machinery field is discussed.Furthermore,a practical strategy for setting up geological machinery virtual prototype is proposed.In order to illustrate the application future of virtual prototyping technology in geological engineering machinery,a pneumatic DTH hammer was selected as an example to be simulated and evaluated with the software PROE,ANSYS,and ADAMS.
Product Assembly Modeling System Based on Pro/Engineer

hong xiwei,zhang shensheng,bu fenglin

1997-01-01

Abstract:The product design of current CAD software system hasn’ satisfied the design requirements in new fields of concurrent engineering and CIMS. This paper introduces a new product assembly modeling system based on Pro/E which is supported by product assembly model.In support of product assembly model,this system can effectively improve the quality of product design, support product concurrent design and satisfy the product market requirments which change more quickly. The authors not only present the basic conception of product assembly model and its features, but also introduce its general design, system function modules and system interface in product assembly modeling system. Now this system has been effectively realized on SUN workstation. We have acquired a lot of pleasure results.

The Technology of the Program Re-develop on Pro/ENGINEER Software System

Development of Computer Aided System for Cam Based on Pro/TOOLKIT

An Integrated Point- Data Processing System in Reverse Engineering

An off-line programming system for robotic drilling in aerospace manufacturing

Study on Offline Programming of Industrial Robot for Cutting Process

Programming Based on Pro /TOOLKIT Asynchronous Mode

A Piston Mold CAD Intelligent System Based on Pro/Engineer

Development of Pro/E Post-Processing System Based on Parallel Machine Tool

Development of Interactive Pro/E Standard Parts Library Based on Coordinate Transformation

The Development of Gear CAD Based on Pro/TOOLKIT and SQL2000

Computer Aided System Development for Complex-shaped Part and Tool Design

Development of Direct Slice Software on Three-Dementional Models Using Protoolkit

Development of intelligent standard parts library system based on Pro/E

Using VB to Second Develop Pro/ENGINEER

RESEARCH ON KEY TECHNOLOGIES OF USER FRAME SYSTEM IN CAPP DEVELOPING TOOL

Study on Parameter Technology for Fixture Design Based on Further Development of Pro/ENGINEER

Development of an interactive assembly-oriented Pro/E standard part library

Design of milling tool platform in mass customization

DESIGN FOR ROBOTIC ARC WELDING OFF-LINE PROGRAMMING AND SIMULATION SYSTEM

Application Study on Virtual Prototyping Technology in the Field of Geological Engineering Machinery

Product Assembly Modeling System Based on Pro/Engineer