Abstract:ZnO is a wide band gap oxide semiconductor material with important and potential applications in sensor, transducer, surface acoustic wave devices, and optoelectronic devices, etc. In the past several years, various methods have been developed for synthesizing the ZnO nanowires. Among these methods, Vapor- liquid-solid (VLS) growth mode is widely used because it does not demand complex apparatus or sophisticated techniques and one can easily synthesized the ZnO nanowires by the catalyzing process of the metal liquid drop in the tip of the nanowires. In this work, based on the VLS growth mechanism, we successfully prepared the twin-crystal Sn catalysted ZnO nanowires with uniform shape and wurtzite structure by a simple method of thermal evaporation of a mixture of SnO powder and Zn powder under the pure N_2 flow and O_2 flow. The pu- rity, composition, microstructrue and crystallinity of the as-prepared ZnO twin-crystal nanowires were investigated by XRD, HRTEM, SEM and SAED. According to SEM images, we observed that the as-synthesized ZnO nanowires were straight and uniform, and were 100~200 nm in diameter and several tens of micrometers in length, some even reaching millimeter level. TEM images and element analysis results verified that the spherical particle on the top of the nanowire was tin metal grain which played the role of catalyst in the process of nanowire growth. These suggested that the growth of ZnO twin-crystal nanowires was controlled by VLS mechanism. HRTEM images confirmed the twin-crystal structure of the nanowires. According to the SAED images, we made sure that the ZnO twin-crystal nanowires grew along [0110] direction and the twin-crystal plane was (101-3). The relationship between the twin-crystal lattice was analyzed by the dark field images and the bright field images. We also explained the VLS growth mechanism of the nanowires.

Preparation of SnO_2 Nanowires by AC Electrodeposition in Anodic Alumina Template and Its Deposition Conditions

Preparation of Nanowire Arrays of Amorphous Carbon Nanotube-Coated Single Crystal SnO<sub>2</sub>

Electrodeposition of Sno2 Thin Films from Aqueous Tin Sulfate Solutions

Preparation and electrochemical properties of nanosized tin dioxide electrode material by sol-gel process

An Electrokinetic Route to Rapid Synthesis of Nickel Hydroxide and Nickel Oxide Nanotubes.

The Preparation of Anodic Aluminum Oxide Ceramic Template and the Fabrication of Silver Nanowires

Preparation and Electrical Properties of Electrospun Tin-Doped Indium Oxide Nanowires

Preparation and Characterization of Tin Catalysted ZnO Twin-crystal Nanowires

Interface catalytic reduction of alumina by nickle for the aluminum nanowire growth: Dynamics observed by in situ TEM

Single Crystalline SnO2 Nanowires Obtained from Heat-Treated SnO2 and C Mixture and Their Electrochemical Properties

Growth of Tin Dioxide Nanobelts Via Au-catalytic VLS Process.

Synthesis of polycrystalline SnO2 nanotubes on carbon nanotube template for anode material of lithium-ion battery

Structural Study on Ni Nanowires in an Anodic Alumina Membrane by Using in Situ Heating Extended X-Ray Absorption Fine Structure and X-Ray Diffraction Techniques

Delft University of Technology Fabrication of copper nanowires via electrodeposition in anodic aluminum oxide templates formed by combined hard anodizing and electrochemical barrier layer thinning

Fabrication of Alumina Nanowires via Anodic Oxidation of Aluminum

Zinc Aluminate Nanotubes Fabrication Based on Heating-Induced Volatilization and Kirkendall Effect in Nanopores of Anodic Aluminum Oxide Template

Preparation and Characterization of SnO2 Nanorods by Thermal Decomposition of SnC2O4 Precursor

Boehmite Nanowires Formation from Porous Anodic Alumina Membrane

Preparation of Sno2 Nanowires Synthesized by Vapor-Solid Mode and Its Growth Mechanism

Effects of preparing conditions on the electrodeposition of well-aligned ZnO nanorod arrays

Synthesis of Uniform Polycrystalline Tin Dioxide Nanofibers and Electrochemical Application in Lithium-Ion Batteries