Abstract:The molecular structures, surface acidity and catalytic activity for NO/NH3/O-2 SCR of V2O5-WO3/TiO2 catalysts were compared for two different synthesis methods: co-precipitation of aqueous vanadium and tungsten oxide precursors with TiO(OH)(2) and by incipient wetness impregnation of the aqueous precursors on a reference crystalline TiO2 support (P25; primarily anatase phase). Bulk analysis by XRD showed that co-precipitation results in small and/or poorly ordered TiO2(anatase) particles and that VOx and WOx do not form solid solutions with the bulk titania lattice. Surface analysis of the co-precipitated catalyst by High Sensitivity-Low Energy Ion Scattering (HS-LEIS) confirms that the VOx and WOx are surface segregated for the co-precipitated catalysts. In situ Raman and IR spectroscopy revealed that the vanadium and tungsten oxide components are present as surface mono-oxo O = VO3 and O = WO4 sites on the TiO2 supports. Co-precipitation was shown for the first time to also form new mono-oxo surface VO4 and WO4 sites that appear to be anchored at surface defects of the TiO2 support. IR analysis of chemisorbed ammonia showed the presence of both surface NH3* on Lewis acid sites and surface NH4** on Bronsted acid sites. TPSR spectroscopy demonstrated that the specific SCR kinetics was controlled by the redox surface VO4 species and that the surface kinetics was independent of TiO2 synthesis method or presence of surface WO5 sites. SCR reaction studies revealed that the surface WO5 sites possess minimal activity below similar to 325 degrees C and their primary function is to increase the adsorption capacity of ammonia. A relationship between the SCR activity and surface acidity was not found. The SCR reaction is controlled by the surface VO4 sites that initiate the reaction at similar to 200 degrees C. The co-precipitated catalysts were always more active than the corresponding impregnated catalysts. The higher activity of the co-precipitated catalysts is ascribed to the presence of the new surface WOx sites associated surface defects on the TiO2 support that increase the ammonia adsorption capacity. (C) 2016 Elsevier B.V. All rights reserved.

Effect of TiO2 Surface Properties on the SCR Activity of NOx Emission Abatement Catalyst

Effect of TiO2 surface properties on the SCR activity of NOx emission abatement catalyst.

Influence of texture structures of TiO2 supports on surface properties and SCR performance of V2 O5-MoO3/TiO2 catalyst

Effect of Dispersion State and Surface Properties of Supported Vanadia on the Activity of V2O5/TiO2 Catalysts for the Selective Catalytic Reduction of NO by NH3

Effect of Titanium Dioxide Support on the Properties for Selective Catalytic Reduction De-NO_x Catalyst

In Situ DRIFTS Studies of NH3-SCR Mechanism over V2O5-CeO2/TiO2-ZrO2 Catalysts for Selective Catalytic Reduction of NOx

Effects of the Morphology and Crystal-Plane of TiO2 on NH3-SCR Performance and K Tolerance of V2O5-WO3/TiO2 Catalyst

Nature of Active Sites and Surface Intermediates During SCR of NO with NH3 by Supported V2O5-WO3/TiO2 Catalysts

Effect of Ce Doping of TiO2 Support on NH3-SCR Activity over V2O5–WO3/CeO2–TiO2 Catalyst

Study on the Interaction Between the Active Phase and Support on V2O5/TiO2 Catalyst

Effect of Preferential Exposure of Anatase TiO2 {0 0 1} Facets on the Performance of Mn-Ce/TiO2 Catalysts for Low-Temperature Selective Catalytic Reduction of NOx with NH3

Experiment Study on SCR DeNOx Behavior of V2O5-WO3/TiO2 Catalysts

Study on the surface properties of TiO2-SnO2 supported catalysts for low temperature selective catalytic reduction of NOx

Investigations of Surface VOx Species and Their Contributions to Activities of VOx/Ti0.5Sn0.5O2 Catalysts Toward Selective Catalytic Reduction of NO by NH3

Effect of Synthesis Methods on Activity of V2O5/CeO2/WO3-TiO2 Catalyst for Selective Catalytic Reduction of NOx with NH3

Influence of Catalyst Synthesis Method on Selective Catalytic Reduction (scr) of No by Nh3 with V2o5-Wo3/Tio2 Catalysts

Revealing the Correlation Between Surface Acid Sites and Activity of VPO/TiO2 Catalyst

Surface properties, NH3 adsorption characteristic and NOx removal mechanism of TiO2-SnO2 supported WO3 catalysts

Nh3 Selective Catalytic Reduction of No: A Large Surface Tio2 Support and Its Promotion of V2o5 Dispersion on the Prepared Catalyst

Exploring the Role of V2O5 in the Reactivity of NH4HSO4 with NO on V2O5/TiO2 SCR Catalysts

Interface sites on vanadia-based catalysts are highly active for NOx removal under realistic conditions