550 W single frequency fiber amplifiers emitting at 1030 nm based on a tapered Yb-doped fiber
Wenchang Lai,Pengfei Ma,Wei Liu,Long Huang,Can Li,Yanxing Ma,Pu Zhou
DOI: https://doi.org/10.1364/OE.395619
IF: 3.8
2020-01-01
Optics Express
Abstract:In this paper, we report a high power single frequency 1030 nm fiber laser with near-diffraction-limited beam quality based on a polarization-maintaining tapered Yb-doped fiber (T-YDF). The T-YDF has advantages of effectively suppressing stimulated Brillouin scattering (SBS) while maintaining good beam quality. As a result, a record output power of 379 W single frequency, linearly polarized, nearly single-mode fiber amplifier operating at 1030 nm is demonstrated. The polarization extinction ratio is as high as 16.3 dB, and the M-2 is measured to be 1.12. Further, the dependence of the thermal-induced mode instability (TMI) threshold on the polarization state of an input signal laser is investigated for the first time. By changing the polarization state of the injected seed laser, the output power can increase to 550 W while the beam quality can be maintained well (M-2 = 1.47). The slope efficiency of the whole amplifier is about 80%. No sign of SBS appears even at the highest output power and the further brightness scaling of both situations is limited by the TMI effect. To the best of our knowledge, this result is the highest output power of all-fiberized single frequency fiber amplifiers. (C) 2020 Optical Society of America under the terms of the OSA Open Access Publishing Agreement