Abstract:Unstable surface species such as residual lithium compounds and surface lattice oxygen at charge state are detrimental factors for the battery performance of Ni-rich cathode (LiNixCoyMn1−x−yO2, x ≥ 0.6, NCM), which induce serious side reactions and lead to rapid capacity loss during cycling. With the advantages of sufficient contacts between gas and solid, gas reactants are introduced to reducing residual lithium compounds via gas-solid reactions or building protective coatings to isolate surface lattice oxygen from the electrolyte via gas-phase deposition, which effectively enhances the cycling stability of NCM. Atomic layer deposition (ALD), as a special coating technology, possesses both the nature of the gas-solid reaction and gas-phase deposition. It is significant to investigate the mechanism of ALD in enhancing the cycling stability of NCM. Here, we report a method to improving the rate capacity and cycling stability of single-crystal NCM via Al2O3 and B2O3 ALD by constructing a highly Li-ions conductive and electrochemical stable surface. The ultrathin coatings are uniformly coated on the surface of NCM. Moreover, surface composition characterizations show the reductions of residual lithium compounds and formations of lithium-containing coatings after the ALD process. By adding a post-annealing process, Al3+ cations and BO3- polyanions doping form on the surface of NCM, which robustly enhanced the stability of surface lattice oxygen of NCM via strong Al-O bond and B-O bond. Moreover, as acidic oxides, B2O3 shows better performance than Al2O3 in reducing residual lithium compounds during the ALD process. Different from Al3+ cations doping occupying the transition metal ions position, BO3- polyanions doping occupies the oxygen ions position, which does not deteriorate the capacity of NCM. Transformation of residual lithium compounds and stabilizing surface lattice oxygen on NCM greatly decrease the formation of LiF and degradation of surface structure, which is the key to the improvement of rate capacity and cycling stability.

Improving the Cycling Stability of Metal–Nitride Supercapacitor Electrodes with a Thin Carbon Shell

Stabilized Tin Nanowire Arrays for High-Performance and Flexible Supercapacitors

Manganese Doped Co3O4 Mesoporous Nanoneedle Array for Long Cycle-Stable Supercapacitors

Nanohybrid TiN/Vertical graphene for high-performance supercapacitor applications

Enhanced Cycling Stability of NiCo2S4@NiO Core-Shell Nanowire Arrays for All-Solid-state Asymmetric Supercapacitors

Plasma-induced amorphous N-nano carbon shell for improving structural stability of LiNi0.8Co0.1Mn0.1O2 cathode

Enhanced Structural Stability of Nickel–Cobalt Hydroxide via Intrinsic Pillar Effect of Metaborate for High-Power and Long-Life Supercapacitor Electrodes

Self‐Grown Oxy‐Hydroxide@ Nanoporous Metal Electrode for High‐Performance Supercapacitors

Improved Cycling Stability of Ni-Rich Cathode Material by In Situ Introduced TM-B-O Amorphous Surface Structure

Improving the Cycling Stability of LiNi0.8Co0.1Mn0.1O2 by Enhancing the Structural Integrity Via Synchronous Li2SiO3 Coating

Enhancing the Structural Stability and Electrochemical Performance of High-Nickel Cathode Materials through Ti Doping with an Exothermic Non-oxide Precursor

Improved Cyclic Stability of LiNi0.8Mn0.1Co0.1O2 Cathode Enabled by a Novel CEI Forming Additive

Stabilizing Conversion Reaction Electrodes by MOF Derived N-doped Carbon Shell for Highly Reversible Lithium Storage

Manganous-Manganic Oxide@Carbon Core-Shell Nanorods for Supercapacitors with High Cycle Retention

Largely Improved Cycling Stability of CoV2O6 Supercapacitor Electrode Synthesized by Deep Eutectic Solvent

Improving the Cycling Stability of LiNi 0.8 Co 0.1 Mn 0.1 O 2 by Enhancing the Structural Integrity via Synchronous Li 2 SiO 3 Coating

Enhancing the structure stability of Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode via encapsulating in negative thermal expansion nanocrystalline shell

Revealing the key factors determining Ni(OH) 2 's electrochemical performance and hereby establishing a carbon shell-protected structure as high-performance electrode material for supercapacitors

Controllable Reduction of NiCoO2@NiCo Core–shell Nanospheres on CNTs for High-Performance Electrochemical Energy Storage

Enabling Enhanced Cycling Stability of a LiNi0.8Co0.15Al0.05O2 Cathode by Constructing a Ti-Rich Surface

(Digital Presentation) Simultaneous Transforming Residual Lithium Compounds and Stabilizing Surface Lattice Oxygen for Ni-Rich Cathode Via Atomic Layer Deposition and Post-Annealing