Abstract:In the energy conversion process, the inert bed material such as sand with spherical shape is usually added to the fluidized bed for the proper fluidization of the non-spherical biomass particles. Understanding fluidization of the binary mixtures containing the biomass and the bed material is therefore significant for better utilization of the biomass. To this end, CFD-DEM model is used to simulate the fluidization of the binary mixtures containing the rod-like particles that represent the light and large biomass particles and the spherical particles that represent the dense and small bed material, in which all particles are described by super-ellipsoid model. Five granular systems with different volume fractions of the rod-like particles but the same particle volume are simulated in this paper. The simulation results demonstrate that the minimum fluidization velocity would increase with the volume fraction of the rod-like particles. The addition of the spherical particles is beneficial to the fluidization of the rod-like particles. The mixing rate in binary granular system and the distribution of the coordinate number would be affected by the gas superficial velocity and the volume fraction of the rod-like particles. For the orientation of the rod-like particles, its distribution in binary granular system is different from that in monodisperse rod-like particle system. But whether in binary granular system or monodisperse rod-like particle system, there is apparent wall effect on the particle orientation.

Investigation on the Minimum Fluidization Velocity of Mixture Containing Biomass Materials and Sands

Research on Minimum Fluidization Velocity of Mixture of Pelletized Biomass and Sands

Analysis of the Fluidization Characteristics of the Sand and Biomass Mixture

STUDY ON THE FLUIDIZATION OF SAWDUST AND RICE HUSK

Fluidization Behavior of Biomass Particles and Its Improvement in a Cold Visualized Fluidized Bed

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Measurement of the Fluidized Velocity in Gas-Solid Fluidized Beds Based on AE Signal Analysis by Wavelet Packet Transform

Study on Biomass Circulation and Gasification Performance in a Clapboard-Type Internal Circulating Fluidized Bed Gasifier.

CFD investigation of the complex multiphase flow of biomass gasification in industrial-scale dual fluidized bed reactor

Fluidization of Sawdust in a Cold Model Circulating Fluidized Bed: Experimental Study

Experimental Study on Rice Husk Combustion in a Circulating Fluidized Bed

Study of the Bed Agglomeration During the Fluidized Bed Combustion of Rice Straw

Effects of Interparticle Forces on Fluidization Characteristics in Liquid-Containing and High-Temperature Fluidized Beds

Prediction of minimum fluidization velocity in pulsed gas–solid fluidized bed

Modeling of the Minimum Fluidization Velocity and the Incipient Fluidization Pressure Drop in a Conical Fluidized Bed with Negative Pressure

Experimental Study on Fluidization Behaviors of Walnut Shell in a Fluidized Bed Assisted by Sand Particles

Gasification of Rice Husk in A Fluidized-Bed Gasifier Without Inert Additives

Study on gasification experiment of wood powder and rice husk in internally circulating fluidized bed gasifier

Minimum Fluidization Velocities for Supercritical Water Fluidized Bed Within the Range of 633–693K and 23–27Mpa

Biomass Gasification In Circulating Fluidized Bed

INVESTIGATION OF THE AGGLOMERATION IN THE RICE STRAW FIRED FLUIDIZED BED