Abstract:A quasi-continuous-wave (QCW) laser diode (LD) driver is commonly used to drive diode bars and stacks designed specifically for QCW operations in solid-state lasers. Such drivers are optimized to deliver peak current and voltage pulses to LDs while maintaining low average power levels. As a result, they are widely used in laser processing devices and laser instruments. Traditional high-energy QCW LD drivers primarily use capacitors as energy storage components and pulsed constant-current sources with op-amps and power metal-oxide-semiconductor field-effect transistors (MOSFETs) as their core circuits for generating repeated constant-current pulses. The drawback of this type of driver is that the driver's output voltage needs to be manually adjusted according to the operating voltage of the load before use to maximize driver efficiency while providing a sufficient current. Another drawback is its inability to automatically adjust the output voltage to maintain high efficiency when the load changes during the driver operation. Drastic changes in the load can cause the driver to fail to function properly in extreme cases. Based on the above traditional circuit structure, this study designed a stability compensation circuit and realized a QCW LD driver for driving a GS20 diode stack with a maximum repetition rate of 100 Hz, a constant current of approximately 300 A, a load voltage of approximately 10 V, and a pulse width of approximately 300 μs. In particular, a high-efficiency, load-adaptive driving method was used with the MOSFETs in the critical saturation region (i.e., between the linear and saturated regions), controlling its power loss effectively while achieving maximum output current of the driver. The experiments demonstrated that the driver efficiency could be maintained at more than 80% when the load current varied from 50 to 300 A.

Multi-current 1 550 Nm Laser Driving Circuit Based on Avalanche Transistors

Large current nanosecond pulse generating circuit for driving semiconductor laser

Design and Implementation of High Precision Semiconductor Laser Drive System Based on MAX1978

Design and implementation of numerical control laser driver circuit with large current and narrow pulse width

Large current nanosecond pulse generating circuit for driving semiconductor laser diode

Design of High Stability Digital Control Driving System for Semiconductor Laser

Design of High Current Nanosecond Pulsed Driving Circuit for LD

A Sub-ns Pulsed VCSEL Driver with Real-Time Adaptive Current Control, Integrated Boost Switching Regulator and Class-1 Laser Eye Safety

Design of A High Power Laser Diode Driver

Design of Nanosecond Pulse Laser Diode Array Driver Circuit for LiDAR

Design of Driving and Temperature Control Circuitry for VCSEL

The Design of a Laser Diode Pulsed Current Source Based on FPGA

An 8-A Sub-1ns Pulsed VCSEL Driver IC with Built-In Pulse Monitor and Automatic Peak Current Control for Direct Time-of-Flight Applications.

Design of Microsecond Level and High Current Pulse Driver Systems for Quantum Cascade Lasers

An Ultra-High Stability, Low-Noise Laser Current Driver with Digital Control

Pulse Driver Power for Array Quantum Cascade Laser

A Novel Design of High Precision Driving System of Laser Diode for TDM-pumped Fiber Raman Amplifier

Application and Control Technique of Semiconductor Laser Diode Based on Single-Chip Microcomputer

High-precision Narrow Pulse Drive Power for Infrared Quantum Cascade Laser

A Load-Adaptive Driving Method for a Quasi-Continuous-Wave Laser Diode

Design of driving power for laser diode