Abstract:Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, Ahead of Print. This paper takes 30,000-ton heavy-haul trains as the research object, and studies the propagation characteristics, train braking ability and longitudinal impulse level of three ECP electronic control signal Propagation modes of segmented electro-pneumatic braking under different lag times. The difference between the train's use of segmented electro-pneumatic braking and air braking in the long ramp operation method is compared. The results show that the best way is when the leading control locomotive sends the ECP signal backward and the slave control locomotive sends the ECP signal both forward and backward. Compared with the worst mode that only the leading control locomotive propagates the ECP signal backward, the coupler force can be reduced by 46.5%, the time difference between the slowest and fastest action vehicles can be reduced by 60.5%, and the emergency braking distance can be reduced by 1.2%. With the increase in the lag time of the slave control locomotive, the differences in the braking capacity and longitudinal impulse level of the three ECP electronic control signal propagation modes decrease. The effectiveness of the slave control locomotive's ability to send ECP signals is closely related to the lag time of the leading and slave control locomotives. Compared with pure air braking, segmented electro-pneumatic braking can delay the braking times of the last two brakes by 32.6 s and 83.7 s,respectively, during the three-cycle braking, and the starting time of relief can be delayed by 12.7 s, 89.8 s and 16.9 s respectively, and the maximum coupler force can be reduced by 30.1%. The research work of this paper can provide reference for the formulation of electro-pneumatic braking scheme of 30,000-tons heavy-haul train.

Research on Impact of Lengthening Emergency Braking Distance of 120 Km/h Freight Trains on Carrying Capacity

The design of electronically controlled pneumatic brake signal propagation mode for electronic control braking of a 30,000-ton heavy-haul train

Simulation study on the influence of longitudinal dynamic force on extreme-long heavy-haul trains

Influence of Cyclic Pneumatic Brake on the Longitudinal Dynamics of Heavy-Haul Combined Trains

Technical Countermeasures and the Longitudinal Force for 20 000 T Heavy Haul Train

Influence of Locomotive Wireless Sync Control Technology on the Longitudinal Force of 20000t Heavy Haul Combined Train

Research on Braking Technology for Heavy Haul Trains in Our Country

Study on the Key Technical Parameter of the Locomotive Draft Gear in a Heavy Haul Combined Train

The relationship between freight train length and the risk of derailment

A heavy-haul train longitudinal-vertical coupled dynamics model and its dynamic behaviour under emergency braking

Effects of the Braking System on the Safety of Train Operation of the Qinghai-Tibet Railway

A New Calibration Method for the Real-Time Calculation of Dynamic Safety Following Distance under Railway Moving Block System

Study on longitudinal dynamics of heavy haul trains running on long and steep downhills

A Real-Time Fluid Dynamic Air Brake Model for Long Heavy Haul Trains

Brake Drum Temperature Rise and Its Influence on Truck Driving Safety in Tunnel Groups Section

Dynamic Response of Railway Bridges under Heavy-Haul Freight Trains

Theoretical study on wheel wear mechanism of high-speed train under different braking modes

Research on Vibration Law of Railway Tunnel Substructure under Different Axle Loads and Health Conditions

Analysis of Wheel Wear and Wheel-Rail Dynamic Characteristics of High-Speed Trains under Braking Conditions

A Time Headway Control Scheme for Virtually Coupled Heavy Haul Freight Trains

Ground vibration from freight railway: environmental impact and potential mitigation measure at propagation path