Analysis of Wheel Wear and Wheel-Rail Dynamic Characteristics of High-Speed Trains under Braking Conditions

Rui Song,Chenxu Lu,Lixia Sun,Zhongkai Zhang,Dilai Chen,Gang Shen
DOI: https://doi.org/10.1155/2024/9618500
IF: 1.616
2024-01-26
Shock and Vibration
Abstract:When high-speed trains operate under braking conditions, the wheel-rail interaction increases significantly, which can lead to more serious wear problems. To analyze the evolution of wheel wear and the dynamic characteristics of wheel-rail under braking conditions, this paper first carries out long-term monitoring of the service state of wheel-rail during the operation period. The study analyzed the matching characteristics of the measured wheel-rail profile and calibrated the wear model by using the collected data. The resulting wear prediction model was then used to examine the wheel wear characteristics under braking conditions. The research results indicate that during the operation period, the wheel experiences tread concave wear within a range of ±20 mm of the rolling circle, at a rate of approximately 0.05 mm per 10,000 km. Meanwhile, the rail experiences top surface wear at a natural rate of about 0.09 mm per year. Concave wear causes the contact point of the wheel-rail to appear in two zones, resulting in a sudden change of contact geometric parameters. The concave worn wheel and rail with a 60 N profile have better matching compared to the 60 rail profile. Increasing the braking torque and wheel-rail friction coefficient will significantly increase the wheel wear depth on straight sections. On small-radius curve sections, rail side lubrication can significantly reduce high rail side wheel flange wear. A worn concave wheel can lead to unfavorable wheel-rail contact geometry characteristics and increase low-frequency components in the vehicle's lateral dynamic response.
engineering, mechanical,mechanics,acoustics
What problem does this paper attempt to address?
### Problems Addressed by the Paper The paper primarily focuses on wheel wear and wheel-rail dynamic characteristics of high-speed trains under braking conditions. Specifically: 1. **Wheel Wear Analysis**: - During the operation of high-speed trains, braking significantly increases the interaction between the wheel and rail, thereby exacerbating the wheel wear problem. The paper analyzes the actual wheel wear conditions during operation through long-term monitoring of the wheel and rail states and calibrates the wear model. 2. **Dynamic Characteristics Study**: - The paper also studies the dynamic characteristics of the wheel-rail system under braking conditions. By analyzing the measurement data, a wear prediction model is established, and the wheel wear characteristics under different braking conditions are examined. 3. **Wear Prediction Model**: - A wear prediction model is established, and this model is used to explore the effects of braking torque, friction coefficient, and operating speed on the distribution and development of wheel wear in high-speed trains, providing guidance and reference for wear management and track maintenance. In summary, the paper aims to comprehensively analyze the wheel wear of high-speed trains under braking conditions and its impact on the dynamic performance of the wheel-rail system by establishing a wear prediction model and combining it with actual monitoring data.