Study on the Key Technical Parameter of the Locomotive Draft Gear in a Heavy Haul Combined Train

Ding Ma

2010-01-01

Abstract:The 20 kt heavy haul combined trains would require higher safety for the locomotive draft gear on Datong-Qinhuangdao Railway in China.The multi-mass dynamics model of 20 kt heavy haul combined train and the draft gear numerical models were presented by the train longitudinal dynamics software in the paper.The locomotives of the heavy haul combined train were equipped with DFC—E100 draft gear,MT—2 draft gear and QKX100 elasticity cement draft gear.On the cases of emergency braking,full service braking and circle braking,the equipments affected the train longitudinal dynamics.The influences were analyzed by the train longitudinal dynamics model.On the case of emergency braking,adjusting the key parameters such as max displacement,max resistance force and initial pressure of DFC—E100 draft gear would affect the longitudinal dynamics performance of the combined train.The results demonstrate that if the three types of draft gears are equipped on the locomotive of 20 kt heavy haul combined train,the max longitudinal forces are below 2 200 kN,and the longitudinal forces of the locomotive in the middle of the heavy haul combined train do not exceed 1 700 kN.The results show that the key parameters such as the max resistance force is set 2.25 MN,the max displacement is set below 110 mm and the initial pressure is set about 150 kN,are suit for the 20 kt heavy haul combined train.