Abstract:<p>Wavelength-switchable fiber laser systems have many potential applications. Herein, the use of an erbium-doped fiber laser based on parallel fiber Bragg gratings (FBGs) (ASE: amplified spontaneous emission; BRM: broadband reflection mirror; CCD: charged-coupled device; EDFL: erbium-doped fiber laser; FBG: fiber Bragg gratings; IR: infrared; MZI: Mach–Zehnder interferometer; OSA: optical spectrum analyzer; OC: output coupler; PC: polarization controller; SNR: signal-to-noise ratios; 3D: three-dimensional; wavelength division multiplexing (WDM)) is proposed to achieve C + L band triple-wavelength-switchable laser output at approximately 1.5 μm. In the proposed system configuration, three parallel FBGs with different resonant wavelengths were fabricated using an 800 nm femtosecond pulsed laser. The proposed fiber laser incorporates first-order FBGs with the periods of 538, 542, and 547 nm. The femtosecond laser was propagated through polyimide coating and cladding and was focused onto the fiber core by a 63× oil lens, while FBGs were inscribed with the use of a point-by-point method to generate resonant wavelengths at 1555.3, 1569.2, and 1583.1 nm. When the FBGs were used as wavelength selectors, a lasing threshold of 85 mW was obtained, and switchable lasing with stable single- and dual-wavelength outputs was achieved based on the adjustment of a polarization controller. Concerning the switchable single-wavelength lasing, the signal-to-noise ratio was greater than 37.23 dB, and the 3 dB linewidth was less than 0.09 nm. The respective power fluctuation measurements were less than 0.22 and 0.68 dB for the single- and dual-wavelength lasers at 26 °C over a scan time of 30 min.</p>

Pulsed Lasers: an Ultrabroadband Mid‐Infrared Pulsed Optical Switch Employing Solution‐Processed Bismuth Oxyselenide (adv. Mater. 31/2018)

Pushing Optical Switch into Deep Mid-Infrared Region: Band Theory, Characterization, and Performance of Topological Semimetal Antimonene

Broadly Tunable Plasmons in Doped Oxide Nanoparticles for Ultrafast and Broadband Mid-Infrared All-Optical Switching.

A Broadband Pulsed Optical Switch from Near-Infrared to Mid-Infrared Employing Multilayer Antimonene

A High-Performance Mid-infrared Optical Switch Enabled by Bulk Dirac Fermions in Cd3As2

A Robust and Tuneable Mid-Infrared Optical Switch Enabled by Bulk Dirac Fermions

Photothermal Switching Based on Silicon Mach–Zehnder Interferometer Integrated with Light Absorber

Single-Electrode-Controlled 26x100ghz Wavelength Switching in V-Coupled-Cavity Semiconductor Laser

Heavily Doped Semiconductor Colloidal Nanocrystals As Ultra-Broadband Switches for Near-Infrared and Mid-Infrared Pulse Lasers.

Indium selenide for Q-switched pulse generation in a mid-infrared fiber laser

Bimetallic solid solution MAX phase Ti 2 NbAlC 2 as saturable absorber for passively Q-switched Er 3+ -doped fiber laser

Wavelength-switchable erbium-doped fiber laser incorporating fiber Bragg grating array fabricated by infrared femtosecond laser inscription

High-peak-power and wavelength tunable acousto-optic Q-switched Er:ZBLAN fiber laser

Sub-picosecond biphasic ultrafast all-optical switching in ultraviolet band

Highly efficient actively Q-switched Er^3+-doped ZBLAN fiber laser operating around 2.8 μm using a La_3Ga_5SiO_14 electro-optical modulator

Refractory Plasmonic Metal Nitride Nanoparticles for Broadband Near‐Infrared Optical Switches

Diode-Pumped Nanosecond Pulsed Laser With Pulse-Transmission-Mode Q-Switch

A multi-wavelength mid-IR laser based on BaGa4Se7 optical parametric oscillators

Q-Switching of Mid-Infrared Er : Yag Laser and Its Radiation Delivery System

A Solution‐Processed Ultrafast Optical Switch Based on a Nanostructured Epsilon‐Near‐Zero Medium