Abstract:The flexible manipulator is a complex electromechanical nonlinear system with a rigid flexible coupling, and its control performance is affected by many factors, such as inaccurate modelling and measurement, load variation, and uncertainty of external disturbance.In view of improving the effect of time-varying model parameters and external disturbances on the performance of the control system, an adaptive dynamic surface control method of the flexible manipulator based on K-state observer was proposed in this study.On the basis of the analysed characteristics of the flexible manipulator system model, a K-state observer had been constructed when the system state was not completely measurable.Then, an adaptive dynamic surface control method was designed by taking the position and speed of the flexible manipulator as the control objective.Finally, the effectiveness of the control method was verified by simulation.Results show that, when no model parameter uncertainty exists in the system, the dynamic surface control has a higher tracking accuracy than the inversion control, the maximum tracking error of angular velocity is reduced by 1.3 times, and the steady-state control input is reduced by 550 times.When the system has model parameters but only the joint angle position can be measured, the conventional inversion control and dynamic surface control cannot achieve system control.The adaptive dynamic surface control can achieve high-precision system tracking at 2.5 s, and the state and parameter estimation of the system can achieve online observation at 4 s and 2.5 s, respectively; and the adaptive dynamic surface control in the steady-state control input can reach 1/18.The proposed method can provide a reference for a flexible robot to achieve high-precision tracking in a complex assembly environment.

Model Adaptive Collision Detection for Flexible Joint Manipulator Based on State Observer

Collision Detection and Safe Reaction of Manipulator Based on Disturbance Observer

Model-Adaptive High-Speed Collision Detection for Serial-Chain Robot Manipulators

Collision detection of flexible joint manipulator by using joint torque sensors

A Collision Detection System for an Assistive Robotic Manipulator

Model-based sensorless robot collision detection under model uncertainties with a fast dynamics identification

Collision Detection and Identification for Robot Manipulators Based on Extended State Observer

Adaptive Dynamic Surface Control of a Flexible Robot Based on the K-State Observer

Force Estimation and Motion Control of Hydraulic Manipulators Based on Extended State Observer

A Pd Controller Of Flexible Joint Manipulator Based On Neuro-Adaptive Observer

Adaptive Impedance-controlled Manipulator Based on Collision Detection

A Robust Observer Design for A Flexible Manipulator Based on A Pde Model

Dual Extended State Observer-Based Adaptive Dynamic Surface Control for a Hydraulic Manipulator with Actuator Dynamics

Modeling for Collision Detecting of Light Robotic Manipulator Without External Sensors

Model-free Friction Observers for Flexible Joint Robots with Torque Measurements

Sensorless collision detection based on friction model for a robot manipulator

Sensorless Collision Detection for Robots Based on Load Torque Observer

An adaptive backstepping observer-controller design for manipulators cooperating flexible payload.

Observer-Based Adaptive Tracking Control of Rigid-Link Flexible-Joint Robot Manipulators

A nonlinear momentum observer for sensorless robot collision detection under model uncertainties

Non-model-based control of manipulators cooperating flexible payload