Abstract:The application of a robot manipulator to the task of parts assembling or collaboration with human workers requires compliant control and intrinsic safety. As a result, it is necessary to exert accurate torque on each joint of the robot through torque sensing and implementing closed-loop joint torque control. This torque servo system is required to track reference torque signals while operating under the influence of motor friction, flexibility of the harmonic drive, noise from the sensor, robot dynamics modelling error and other unknown certainties, resulting in large control efforts. This paper focuses on providing better compliance control for collaborative robots and proposes a joint torque controller design under development with active disturbance rejection concept. The controller is designed through a novel extended state observer to estimate and compensate for the unmodelled dynamics of the system, nonlinearly variable motor friction, and other uncertainties. Then, a simple proportional differential controller is designed to produce control law. In spite of the remarkable performance in dealing with the mechanical dynamics of the joint actuator, the original controller does not work well with the electrical factor of the joint actuator due to the limited current loop bandwidth in the hardware of motor and driver. To eliminate the detrimental effect of the time delay in current servo, a predictive output method based on a nonlinear tracking differentiator (TD) is used to improve the controller within the framework of active disturbance rejection control. Both simulations and experiments are conducted on a prototype one degree of freedom manipulator with a joint torque sensor. The results demonstrate the enhancement of both the system stability and disturbance rejection performances. Based on the proper treatment of actuator delay, the dominant effect of the motor friction and the flexibility of the harmonic drive has been reduced to insignificance. Moreover, the proposed controller is easy to implement because the explicit dynamic model of the system is not required.

Collision detection of flexible joint manipulator by using joint torque sensors

Collision Detection and Safe Reaction of Manipulator Based on Disturbance Observer

A Unified Approach for Second-Order Control of the Manipulator With Joint Physical Constraints

Adaptive Impedance-controlled Manipulator Based on Collision Detection

A Collision Detection System for an Assistive Robotic Manipulator

An Approach Of Integrating Force Sensing And Safety Operation For Manipulator

Model Adaptive Collision Detection for Flexible Joint Manipulator Based on State Observer

Modeling and Control of Flexible Joint Robotic Manipulator

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Robust Tracking Control of Robot Manipulators with Actuator Faults and Joint Velocity Measurement Uncertainty

A Method to Regulate the Torque of Flexible-Joint Manipulators with Velocity Control Inputs

Collision detection for six-DOF serial robots force/position hybrid control based on continuous friction model

Model-based sensorless robot collision detection under model uncertainties with a fast dynamics identification

A Manipulator'S Safety Control Strategy Based On Fast Continuous Collision Detection

Joint Torque Control of a Collaborative Robot Based on Active Disturbance Rejection with the Consideration of Actuator Delay

Compliance Control for Robot Manipulation in Contact with a Varied Environment Based on a New Joint Torque Controller

Task-Oriented Collision Avoidance in Fixed-Base Multi-manipulator Systems.

Adaptive Fault-Tolerant Control for a Joint Flexible Manipulator Based on Dynamic Surface

Modeling for Collision Detecting of Light Robotic Manipulator Without External Sensors

A Novel Hybrid Safety-Control Strategy for a Manipulator

Torque Sensorless Decentralized Position/Force Control for Constrained Reconfigurable Manipulator via Non-fragile H-infinity Dynamic Output