Abstract:This paper proposes a novel method for active collision avoidance to protect the human who enters a robot's workspace in a human-robot collaborative environment. The proposed method uses a somatosensory sensor to monitor the robot's workspace and detect anyone attempting to enter it. When someone enters the workspace, a Kinect detects and calculates the position of his or her skeleton points in real-time. However, due to the measurement errors and noise of the device, the tracking error increases over time. Therefore, the proposed method applies an improved particle filter (IPF) to accurately estimate the position of the skeleton points. In order to detect the human-robot collision in real-time, the proposed method uses cylinders to establish the bounding box model for human bones and robots and the human-robot collision is replaced by the collision between the cylinders, greatly improving the efficiency of collision detection. Moreover, taking human safety and productivity into account, the robot velocity control is carried out based on the distance between the robot and human. Then, the proposed method uses a rule-based logic system to analyze human motion so that the robot can take appropriate measures to avoid humans. Finally, the dynamic roadmap (DRM) approach plans new paths in real-time to allow robots to bypass humans. By actively avoiding collisions, the proposed method ensures that the robot will never touch the human body. The significant advantage of the proposed method is that it can detect humans in real-time, analyze their behavior and protect humans without any modification to the robot. The proposed method has been tested in practical applications, and the results show that it can successfully guarantee the safety of people entering the robot's workspace.

Modeling for Collision Detecting of Light Robotic Manipulator Without External Sensors

Collision Detection and Safe Reaction of Manipulator Based on Disturbance Observer

Moving Obstacle Avoidance for Redundant Manipulator Via Weighted Least Norm Method

A Collision Detection System for an Assistive Robotic Manipulator

Dynamical Obstacle Avoidance of Task- Constrained Mobile Manipulation Using Model Predictive Control

Sensorless collision detection based on friction model for a robot manipulator

A Method of Sensorless Collision Detection Based on Motor Current for Robot Manipulator

Research on Identifying Robot Collision Points in Human–Robot Collaboration Based on Force Method Principle Solving

A Universal Algorithm for Sensorless Collision Detection of Robot Actuator Faults

Robot Collision Detection Based on Dynamic Model

Active Collision Avoidance for Human-Manipulator Safety

Modeling and Optimization of Head-Collision of a Flexible Joint Robot

Collision detection for six-DOF serial robots force/position hybrid control based on continuous friction model

ROBOTIC ARM COLLISION REACTION STRATEGIES FOR SAFE HUMAN–ROBOT INTERACTION WITHOUT TORQUE SENSORS

A New Method For Sensorless Collision Detection On The Servo Level

Model-based sensorless robot collision detection under model uncertainties with a fast dynamics identification

Kinematic and Dynamic Models of Hyper-Redundant Manipulator Based on Link Eigenvectors

Collision Detection of Robots Based on a Force/Torque Sensor at the Bedplate

Robotic High-precision Collision Detection and Force Estimation Under Unknown Load

An Approach Of Integrating Force Sensing And Safety Operation For Manipulator

Collision detection of flexible joint manipulator by using joint torque sensors