Abstract:Considering the shortage and toxicity of raw materials, recycling cathode materials from spent lithium-ion batteries is currently the most promising measure to realize the green sustainability of cathode materials. Presently, most hydrometallurgical recovery methods and some cathode material synthesis methods are based on the use of acidic solutions. This study addresses the dissolution–chelation mechanism and limitations of the LiNi1/3Mn1/3Co1/3O2 cathode materials in acidic solution, aiming at highlighting the interface reaction mechanism. In this work, malonic acid and hydrogen peroxide were used as the leaching system to conduct efficient green leaching of spent ternary cathode materials. The effects of different reaction parameters on the recovery efficiency of various valuable metal ions were studied by orthogonal and single-factor condition experiments. The results show that under the optimal conditions the leaching efficiency of the lithium ion is 95%, and the leaching efficiencies of Ni, Co, and Mn all reached over 98%. The dissolution mechanism was studied at the macro- and microscales based on the material characterization technology, kinetic studies, and the theoretical calculations of the binding energy of the possible product. Kinetic studies found that the dissolution–chelation process is controlled by chemical reactions or a chemical and diffusion reaction, and calculation results of the activation energy and binding energy show that lithium ions are leached preferentially over other metal ions. In addition, this recovery technology can be effectively used to recycle other spent rechargeable battery materials and may also lay a theoretical foundation for further study on the regeneration and resynthesis of materials.This article has not yet been cited by other publications.

Exploration of Sequential Mechanochemical Activation and Complexation Leaching for Enhanced Recovery of Valuable Metals from Spent Lithium-Ion Batteries

Selective Lithium Leaching from Spent Lithium-Ion Batteries Via a Combination of Reduction Roasting and Mechanochemical Activation

Mechanochemically assisted persulfate activation for the facile recovery of metals from spent lithium ion batteries

Succinic Acid-Based Leaching System: A Sustainable Process for Recovery of Valuable Metals from Spent Li-ion Batteries

Mechanochemically-aided leaching of cobalt from the cathode of spent Lithium-ion batteries

Sustainable recovery of valuable metals from spent lithium-ion batteries using DL-malic acid: Leaching and kinetics aspect

Recover value metals from spent lithium-ion batteries via a combination of in-situ reduction pretreatment and facile acid leaching

One-step leaching mechanism for total elemental recovery from spent lithium-ion batteries utilizing ethylene diamine tetraacetic acid

Highly Selective Extraction of Lithium from Spent NCM Cathode Powder Reconstructive Electrode by Acid-Free Electrochemical Process

Low-viscosity acidic deep eutectic solvent for extraction of valuable metals from spent NCM

Leaching Mechanisms of Recycling Valuable Metals from Spent Lithium-Ion Batteries by a Malonic Acid-Based Leaching System

Leaching of valuable metals from cathode active materials in spent lithium-ion batteries by levulinic acid and biological approaches

Comprehensive Recovery of NCM Cathode Materials for Spent Lithium-Ion Batteries by Microfluidic Device

Enhancement of leaching of cobalt and lithium from spent lithium-ion batteries by mechanochemical process

Recovery Value Metals from Mixed Spent Li-Ion Batteries

Scientific Opinion of the Panel on Food Additives, Flavourings, Processing Aids and Materials in Contact with Food

Novel approach to recycling of valuable metals from spent lithium-ion batteries using hydrometallurgy, focused on preferential extraction of lithium

Eco-Friendly Organic Acid-Assisted Mechanochemical Process for Metal Extraction from Spent Lithium-Ion Batteries

Recovering valuable metals from the leaching liquor of blended cathode material of spent lithium-ion battery

A Novel Green Process for Recovery of Transition Metal Ions from Used Lithium-ion Batteries by Selective Coordination of Ethanol

Interfacial processing engineering of co-grinding agent for recycling of spent lithium-ion batteries