Abstract:Solar cells built with arrays of semiconductor wires have been studied for several years. They present some potential advantages over their bulk counterparts, such as (much) less use of semiconductor material, as well as improved light absorption properties. Most wire-based solar cells are fabricated with arrays of semiconductor p–n junctions, either radial or axial. Here, using a newly developed random connection process based on nickel silicide nanowires, we have built Schottky-type solar cells on interdigitated base and emitter coplanar electrodes that reach an efficiency of 6.5% when only 64% of the footprint area of the device is covered with p-type Si wire light-absorbers. To the best of our knowledge, this is the best efficiency reported so far for a Schottky-type wire-based solar cell; a simple extrapolation of the surface area suggests that an efficiency of more than 10% can be reached, which is comparable to that of single-junction hydrogenated amorphous Si cells. We also compare the Schottky-type cell with a "control" p–i–n one using the same device layout and the same nickel silicide nanowire random connection process: the efficiency of the p–i–n cell is higher (∼8%) but this is due to a higher VOC, the short-circuit current density (ISC) being very similar in both cases, close to 20 mA/cm2. The maximum temperature reached throughout the fabrication process of the cells (whether Schottky-type or p–i–n) is 550 °C, corresponding to the growth of the crystalline Si wires. Altogether, the results presented here hold promises toward cheap photovoltaics based on the use of randomly organized and randomly connected Si wire arrays.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10127?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10127</a>.SEM pictures of Si wires and completed cells with the Ni3Si2 contacts; detailed determination of the footprint of the cells; energy band diagram of the Schottky cell; determination of ideality factors and series resistance; coplanar p–i–n solar cell; (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10127/suppl_file/am0c10127_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Silicon Nanowires Solar Cell

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

Fabrication of Slantingly-Aligned Silicon Nanowire Arrays for Solar Cell Applications

FABRICATION OF SILICON NANOWIRE (SiNW) ARRAYS AND APPLICATION IN SOLAR CELL

Silicon Nanowire Array Photoelectrochemical Solar Cells

Antireflection Properties and Solar Cell Application of Silicon Nanostructures

Radial N-I-P Structure Silicon Nanowire-Based Solar Cells on Flexible Stainless Steel Substrates

Silicon nanowire solar cells grown by PECVD

Morphology-Tunable Assembly of Periodically Aligned Si Nanowire and Radial Pn Junction Arrays for Solar Cell Applications

High-Performance Silicon Nanohole Solar Cells

Large-area Silicon Nanowires from Silicon Monoxide for Solar Cell Applications.

SnS homojunction nanowire-based solar cells

Broadband Light-Concentration with Near-Surface Distribution by Silver Capped Silicon Nanowire for High-Performance Solar Cells

Design and Fabrication of Silicon Nanowires Towards Efficient Solar Cells

Single Crystalline Ordered Silicon Wire/pt Nanoparticle Hybrids for Solar Energy Harvesting

Performance of Silicon Nanowire Solar Cells with Phosphorus-Diffused Emitters

High-performance silicon nanowire array photoelectrochemical solar cells through surface passivation and modification.

Preparation and Photovoltaic Properties of Silicon Nanowire Arrays

New Schottky-Type Wire-Based Solar Cell with NiSi x Nanowire Contacts

CuO Nanowires-Based Radial Hetero-Junction Thin Film Silicon Solar Cells with a High Open-Circuit Voltage

Surface nanostructured high efficiency vertical wire-based solar cell