Abstract:The global demand for renewable energy sources has intensified the quest for innovative and inexpensive solar cell technologies. Employing thin crystalline silicon (c-Si) is of great interest in these advancements. Here, integration of organic poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and nanostructured thin-flexible Si wafer (~50 μm) is investigated to harness their synergies in fabricating mechanically flexible hybrid heterojunction solar cells (HHSCs). Flexible Si wafers are prepared through alkali etching followed by SiNW on single side of the thin wafers using single-step silver (Ag)-assisted chemical etching (Ag-ACE) process at room temperature. The SiNW incorporated flexible solar cells produced an impressive power conversion efficiency (PCE: 9.0%) even in the simple design owing to enhanced light absorption in broad spectral range. It is found that SiNW length and polymer layer thickness play critical role in defining the trade-off among the optoelectronic, junction and solar cell parameters. The SiNW of 170±20 nm length and PEDOT:PSS of 100±10 nm layer is the optimal combination for the best solar cell parameters. The enhanced light trapping and charge generation rate are also confirmed by finite-difference time-domain (FDTD) simulation. Detailed analysis of light trapping, junction properties, surface passivation, device performance parameters and their co-relation have been discussed. Our study demonstrates the SiNW-incorporated flexible and efficient PEDOT:PSS/n-Si HHSCs, which can lead to not only the advancement of low-cost photovoltaics but also offer potential for diverse applications, from portable electronics to wearable technology.

Silicon nanowire solar cells grown by PECVD

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

Radial junction amorphous silicon solar cells on PECVD-grown silicon nanowires.

Bismuth-catalyzed and Doped Silicon Nanowires for One-Pump-down Fabrication of Radial Junction Solar Cells.

Sn‐catalyzed silicon nanowire solar cells with 4.9% efficiency grown on glass

New Approaches To Improve The Performance Of Thin-Film Radial Junction Solar Cells Built Over Silicon Nanowire Arrays

All-in-situ fabrication and characterization of silicon nanowires on TCO/glass substrates for photovoltaic application

High efficiency and stable hydrogenated amorphous silicon radial junction solar cells built on VLS-grown silicon nanowires

Substantial Improvement of Short Wavelength Response in n-SiNW/PEDOT:PSS Solar Cell

Heterojunction Photovoltaic Devices Utilizing Single Wall Carbon Nanotube Thin Films and Silicon Substrates

A Review on Plasma-Assisted VLS Synthesis of Silicon Nanowires and Radial Junction Solar Cells

Assessing individual radial junction solar cells over millions on VLS-grown silicon nanowires.

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Performance of Silicon Nanowire Solar Cells with Phosphorus-Diffused Emitters

Vertically aligned ZnCdS nanowire arrays/P3HT heterojunctions for solar cell applications

Photoconversion Optimization of Pulsed-Laser-Deposited p-CZTS/n-Si-Nanowires Heterojunction-Based Photovoltaic Devices

Advanced PECVD Processes for SiNW Based Solar Cells and Thin Film Transistors

Carbon Nanotube Arrays for Optical Design of Amorphous Silicon Solar Cells

An Innovative Light Trapping Structure Fabrication Method on Diamond-Wire-Sawing Multi-Crystalline Silicon Wafers

Silicon Nanowires Incorporated Efficient and Flexible PEDOT:PSS/Silicon Hybrid Solar Cells

Photovoltaic measurements in carbon nanotube - Amorphous silicon core/shell nanowire