Abstract:Based on the shaking table test of 1:20 scale structural models of the large-span isolated and non-isolated flat grid structures under the action of horizontal-bidirectional (2D) and three-dimensional (3D) rare earthquake, the dynamic characteristics, including natural vibration frequency, damping ratio, the acceleration and displacement responses are investigated. The results show that the base isolation could significantly prolong the structural vibration periods and increase the damping ratio. The capacity of energy dissipation for the base-isolated structure can also be improved. The horizontal acceleration amplification factors (AAFs) of the structure can be reduced greatly due to the base isolation, which effectively reduces the vertical vibration of the large-span grid. Under the 3D seismic input, the horizontal AAF of each layer is greater than that under the 2D one, which illustrates that the vertical seismic input increases the horizontal dynamic response of the structure. Furthermore, the finite element models of the isolated and non-isolated structures were simulated. The experimental results are in good agreement with the numerical results. The parameter optimization of isolation bearings was conducted by using finite element software. The seismic response of each layer under different shear to weight ratios ( μ ) was analyzed. It can be found that the parameters of the isolation layer have an optimal range which makes the dynamic response of the structure reach a minimum value under the rare earthquake.

Erratum To: Experimental Research and Numerical Simulation of a Large-span Isolated Structure Considering Multi-dimensional Input Effects

Numerical Simulation Analysis and the Program for Steel-Concret Composite Long Column in Eccentricaly-loaded

Wind tunnel experiment and numerical simulation of wind pressure distribution of long-span ellipsoidal shell structure

Error Study of Displacement Model for Seismic Analysis of Long-Span Structures Subjected to Multi-Support Earthquake Excitations

Numerical Investigation and Design of Thin-Walled Complex Section Steel Columns

Experimental research and numerical simulation of a large-span isolated structure considering multi-dimensional input effects

Corrigendum to “frequency Modelling and Solution of Fluid–structure Interaction in Complex Pipelines” [J. Sound Vib. (2014) 2800–2822]

Analysis model for long-span isolated structure subjected to multi-support earthquake excitations

Analysis of Transient Thermal Stress in Cylindrically Orthotropic Tubes

NUMERICAL SIMULATION OF FAILURE BEHAVIOR OF REINFORCED CONCRETE FRAME STRUCTURES BY DISCRETE ELEMENT METHOD

Erratum to: Investigation of natural ventilation performance of large space circular coal storage dome

Corrigendum to “surface Effect on the Contact Problem of a Piezoelectric Half-Plane” [int. J. Solids Struct, 185-186 (2020) 380–393]

Erratum To: Experimental Investigation on a Single NACA Airfoil’s Nonlinear Aeroelasticity in Wake Induced Vibrations

Erratum: "A Numerical Scheme for Anisotropic Reactive Nonlinear Viscoelasticity" [ASME J. Biomech Eng., 2023, 145(1), p. 011004; DOI: 10.1115/1.4054983]

Corrigendum to ‘vibration Control of Beams with Active Constrained Layer Damping’

Correction to: An Integrated Modelling Approach for Flood Simulation in the Urbanized Qinhuai River Basin, China

Correction: Calculation of displacements and internal forces of anchored retaining piles

Correction: Three-dimensional Numerical Simulation and Experimental Investigation of Boundary-Driven Streaming in Surface Acoustic Wave Microfluidics

Numerical Simulation for Local Stability of Box-section Columns *

WITHDRAWN: Experimental and Numerical Analysis of Local Reinforced Bolted Composite Joint

Erratum: Corrigendum to “High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites” (Composite Structures (2015) 134 (132–141))