Abstract:A 500 kV high-voltage AC fault current limiter (FCL) based on a high coupled split reactor (HCSR) is proposed by the National key R&D project team. Low impedance under normal conditions and high impedance under short-circuit conditions are accomplished by the cooperation of HCSR and high-speed switches. High-speed switches play an important role in current limiting processes, thus interruption characteristics of the high-speed switch in the 500 kV FCL are studied in this paper. The simulation model of the FCL and the external equivalent power grid are established. The short-circuit current and recovery voltage characteristics of the high-speed switch in FCL are simulated. The results show that maximum DC component of the short-circuit current of the high-speed switch reaches 91%, the maximum peak value is 118 kA, and the longest arcing time is 14.8 ms. There is a discontinuity in the curve of the short-circuit current peak and arcing time as a function of the short-circuit occurrence time; the peak recovery voltage of a single break of the high-speed switch has a maximum value of 87.5 kV under a three-phase ungrounded short-circuit condition, and the rate of rise of recovery voltage is 0.22 kV/s. The recovery voltage peak shows a period change with the short-circuit occurrence time, and the period is 10 ms. The effects of the shunt capacitor value and short-circuit ground resistance on the recovery voltage of high-speed switching are also studied. The research can be used for reference by R&D personnel and testers of 500 kV FCLs.

Interruption Characteristics of High-speed Switches in 500 Kv Fault Current Limiter with High Coupled Split Reactance

Study of Surface Flashover and Breakdown Characteristics in Liquid Nitrogen for Sfcl Application

Fault Current Limiter Based on Current Commutation at Power Frequency Zero and Simulation of 40.5 Kv Fast Vacuum Switch

Fault Detection System for 500 kV AC Fault Current Limiter Based on High-Coupled Split Reactor

Analysis of Short-time Withstand Current and Peak Withstand Current Test of 500kV AC Fault Current Limiter

Simulation Study of New Solid-State Fault Current Limiter

Research on the Influence of Current Limiter Based on Highly Coupled Split Reactor on Main Circuit Breaker Overvoltage

Design Improvement of Fault Current Limiter Based on High Coupled Split Reactor Considering the Impact of Internal Ground Fault

Research on the influence of compound fault current limiter hybrid multiplexing TCSC on transient recovery voltage

Design Of A Novel Bridge-Type Fcl And Its Application In Upfc

Simulation study on a new solid state fault current limiter for high-voltage power systems

Hybrid Multifunctional Saturated-core Fault Current Limiter

Design and Research of a Novel Unified Power Flow Controller with Fault Current Limiter

STUDY ON A NOVEL SOLID STATE FAULT CURRENT LIMITER WITH BYPASS REACTOR

Simulation Study of Series Resonance Type Fault Current Limiter

Influence on Switching Capability of HV Circuit Breakers by Employing Rectifier Type Fault Current Limiter

Two-Stage DC Fault Current Limiter Combining Hybrid Magnetic Materials and Active Flux Coupling Coils

Effects of a Flux-Coupling Type Superconducting Fault Current Limiter on the Surge Current Caused by Closed-Loop Operation in a 10kv Distribution Network

A Modified DC Fault Protection Scheme for Multi-Terminal HVDC Grid Based on Fault Current Limiters

Simulation Method for Current-Limiting Effect of Saturated-Core Superconducting Fault Current Limiter

Analysis of Application of Superconducting Fault Current Limiter to AC Line of HVDC