Abstract:Abstract Electrofusion joint is a principal connection method within non-metallic pipeline systems, and the mechanical strength of electrofusion joints is of great importance to achieve safe operation of pipeline systems. By manufacturing the electrofusion joints with short carbon fiber reinforced thermoplastic composites (SCFRTCs), the mechanical strength of electrofusion joints has been significantly improved, which shows great potential in mechanical enhancement of electrofusion joints. However, due to inherent stress concentrations within the joint structure and the limited ductility characteristic of SCFRTCs, SCFRTCs electrofusion joints are prone to crack propagation failure. Elucidating the failure mechanics of SCFRTCs electrofusion joints is vital for their continuous refinement and the secure operation of pipeline systems. In this study, SCFRTCs were first prepared and their fundamental mechanical properties were investigated. Subsequently, electrofusion joints were manufactured by SCFRTCs. A finite element models, combined with contour integral method, was developed to ascertain the crack propagation failure mode of SCFRTCs electrofusion joints. The influence of yield strength of SCFRTCs and wall thickness of joints on crack initiation of SCFRTCs electrofusion joints were systematically analyzed. The results demonstrated that the stress level in most areas along the wall thickness is low when the crack in the joint initiates. Increase in joint wall thickness and material yield strength can improve the internal pressure of crack initiation, but the utilization rate of materials strength decreases gradually. Additionally, short-term bursting tests of SCFRTCs electrofusion joints were conducted to determine the bursting pressures of electrofusion joints with varying wall thicknesses. By analyzing the crack morphology on the cross-sections of the bursting joints, it is found that after crack initiation, the crack is driven by internal pressure and gradually propagates until the joint fails. The results of this study can provide reference for the design and application of SCFRTCs electrofusion joints.

Crack Propagation Mechanism of Flexible Composite Stiffened Bags under Pressure Load

Investigation on Crack Propagation Failure Modes of Short Carbon Fiber Reinforced Polyethylene Electrofusion Joints

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

An Integrated Approach to Analyzing Matrix-Crack-induced Stiffness Degradation and Medium Leakage in Linerless Composite Vessels

Parameter Analysis and Prediction of Crack Propagation for Thermoplastic Composite Pipes under Lateral Pressure

The Fatigue Crack Growth under Compressive to Compressive Fluctuating Loading

Pressure Container Surface Crack Analysis

Investigation of Crack Propagation and Failure of Liquid-Filled Cylindrical Shells Damaged in High-Pressure Environments

Crack Arrest Behavior of Central-Cracked Stiffened Plates under Uniform Tensions

A Study of the Propagation of an Embedded Crack in a Composite Laminate of Finite Thickness

Initial Crack Propagation and the Influence Factors of Aircraft Pipe Pressure

Simulation of crack propagation of fiber reinforced cementitious composite under direct tension

Progressive damage analysis for multiscale modelling of composite pressure vessels based on Puck failure criterion

Experimental and Meshless Numerical Simulations on the Crack Propagation of Semi-Circular Bending Specimens Containing X-Shaped Fissures Under Three-Point Bending

VECTOR FORM INTRINSIC FINITE ELEMENT BASED APPROACH TO SIMULATE CRACK PROPAGATION

Buckling and material failure analyses for ring-stiffened composite shells subjected to hydrostatic pressure

Internal 3D Cracks Evolution and the Toughening Mechanisms of the Hierarchical Structures in Strombus Gigas Shell

Experimental Study on Compression Failure of Composite Laminates with Prefabricated Surface Cracks

Stress and Damage Analyses of Composite Overwrapped Pressure Vessel

Interface fracture progression of composite T-stiffened skins fabricated by co-bonding and co-curing under tensile loading: an experimental investigation