Abstract:Heat generation, accumulation, and runaway severely affect the practical applications of lithium-ion batteries (LIBs) using Ni-rich Ni/Co/Mn ternary cathode materials. In principle, the aforementioned thermal characteristics of a LIB are mainly determined by the heat generation power of the cathode and anode materials during charging/discharging. In this work, the heat generation power of the LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode material coated with and without reduced graphene oxide (rGO) is studied systematically. By coupling an electrochemical workstation with a multichannel microcalorimeter, the heat generation power of NCM811 under different charging/discharging conditions was measured on coin cells. Meanwhile, a theoretical model was also proposed to analyze the intrinsic factors of the NCM811 that possibly affect its heat generation power during electrochemical charging/discharging. The results show that the particle size, lithium-ion diffusion coefficient, specific heat capacity, thermal conductivity, and electric conductivity can all affect the heat generation power. Different from that, the particle size and the lithium-ion diffusion coefficient of NCM811 are the dominating factors. It is demonstrated further that by coating rGO onto NCM811, the lithium-ion diffusion coefficient of NCM811 is improved, and the heat generation power is reduced accordingly.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.2c00026.Schematic diagram of an in situ thermal/electrochemical testing system; the theoretical model of an NCM811 coin half-cell; the D50 values of four NCM811/rGO samples; the GITT potential curves versus testing time; the diffusion coefficients of Li+; the curves of heat flow at different voltages versus charging times; the DSC curves, the rate capability, and cycling stability data; the SEM image of NCM811/rGO-0.25 after cycling 100 times; the electrochemical/thermal model equations and boundary condition; and the parameters used for the simulation (PDF)This article has not yet been cited by other publications.

Heat Generation Power of the LiNi0.8Co0.1Mn0.1O2 Cathode at Higher Charging Cutoff Voltages

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Effect of Cation Mixing of Li+/Ni2+ on Heat Generation of NCM811 Cathode During Long-Term Cycling at Elevated Temperature

Effect of cation mixing of Li<SUP>+</SUP>/Ni<SUP>2+</SUP> on heat generation of NCM811 cathode during long-term cycling at elevated temperature

Unraveling the degradation mechanism of LiNi0.8Co0.1Mn0.1O2 at the high cut-off voltage for lithium ion batteries

Ionic Conductive Interface Boosting High Performance LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

Unraveling the Capacity Fading Mechanisms of LiNi0.6Co0.2Mn0.2O2 at Elevated Temperatures

Insight into the Structural Evolution and Thermal Behavior of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode under Deep Charge

Regulating the Heat Generation Power of a LiNi0.8Co0.1Mn0.1O2 Cathode by Coating with Reduced Graphene Oxide

Multifunctional Integration of Double-Shell Hybrid Nanostructure for Alleviating Surface Degradation of LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> Cathode for Advanced Lithium-Ion Batteries at High Cutoff Voltage

Impact of Evolution of Cathode Electrolyte Interface of Li(Ni0.8Co0.1Mn0.1)O2 on Electrochemical Performance During High Voltage Cycling Process

Towards the high-energy-density battery with broader temperature adaptability: Self-discharge mitigation of quaternary nickel-rich cathode

Multifunctional Integration of Double-Shell Hybrid Nanostructure for Alleviating Surface Degradation of LiNi0.8Co0.1Mn0.1O2 Cathode for Advanced Lithium-Ion Batteries at High Cut-Off Voltage.

In Situ Mitigating Cation Mixing of Ni-Rich Cathode at High Voltage Via Li2mno3 Injection

Regulating the Heat Generation Power of a LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode by Coating with Reduced Graphene Oxide

Investigation and Suppression of Oxygen Release by LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode under Overcharge Conditions

Cathode-anode reaction products interplay enabling high performance of LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub>/artifici al graphite pouch batteries at elevated temperature

Revisiting the Impact of Co at High Voltage for Advanced Nickel-Rich Cathode Materials

Design of Nb5+-doped high-nickel layered ternary cathode material and its structure stability

Stabilization of NCM811 cathode for Li-ion batteries by N-doped carbon coating

Degradation Mechanism of LiNi 0.5 Co 0.2 Mn 0.3 O 2 /Graphite Cells at Elevated State of Charge and High Temperature