The Effective Separation of Gallium, Vanadium, and Aluminum from a Simulated Bayer Solution by Resin Exchange
Zhifeng Qin,Xi Jin,Zhen Yang,Yuntao Xin,Weizao Liu
DOI: https://doi.org/10.3390/ma17164109
IF: 3.4
2024-08-22
Materials
Abstract:The effective recovery of gallium from wastewater discharge in the Bayer process is promising for the long-term development of gallium resources. The adsorption and desorption behavior of gallium (Ga), vanadium (V), and aluminum (Al) ions on a strong acidic styrene cation exchange resin (JK resin) from a simulated Bayer solution was systematically investigated by static experiments. The results showed that the optimum conditions for separating Ga from V and Al were at low temperatures and short contact times, with 78.30%, 15.16%, and 6.63% of the adsorption efficiency at 25 °C and 60 min, respectively, for Ga, V, and Al. The adsorption kinetics of Ga3+ conformed to the pseudo-second order model, and the static saturation adsorption capacity was 18.25 mg/g. The Langmuir model fitted the adsorption isotherm of gallium well, and the maximum adsorption capacity was 1.11 mg/g at 25 °C. FT-IR spectroscopy and XPS showed that the mechanism of the Ga3+ adsorption was only related to the interaction of the oxygen atoms of the amide oxime group (C=NOH). The separation of Ga, V, and Al can be achieved by desorbing 98% of Al with low concentrations of ammonia and 90% of Ga with low concentrations of hydrochloric acid. The results indicate that JK resin is an efficient adsorbent for separating gallium and vanadium in alkaline solutions.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering