Abstract:Bauxite residue, the byproduct of alumina production, may potentially be a valuable source of strategically important metals, e.g. Gallium. Ga is considered critical element for the EU. To ensure adequate supply of Ga for the future, secondary sources such as bauxite residue should be exploited with efficient extraction methods. Therefore, in this study, mineral acids (H2SO4, HCl, and HNO3) and an organic acid (H2C2O4—oxalic acid), were evaluated for their efficiencies to extract Ga from bauxite residue. Using H2C2O4, the highest Ga leaching efficiencies were achieved, compared to other acids. The achieved leaching experimental results were considered for the construction of a design of experiment (DOE) model to achieve optimal conditions for Ga extraction using H2C2O4. These values were validated by experiments which resulted in ~ 94% accuracy. In the second part of the study, using pure Ga solution, the adsorption of Ga onto zeolite HY was studied. The effects of adsorbent dosage, temperature, and contact time on the adsorption of Ga from solution by zeolite HY were studied. The obtained adsorption experimental results were used to construct a DOE model to achieve optimal conditions for Ga adsorption on to zeolite HY. The DOE-achieved optimal conditions were evaluated by experiments in pure Ga solution, which resulted in an efficiency of ~ 99.4 %. In the third stage, the bauxite residue was leached in H2C2O4 under the optimal DOE conditions which resulted in 71% efficiency; thus the resulting bauxite residue solution was subjected to adsorption using zeolite HY under the optimal DOE conditions achieved. The Ga adsorption onto the zeolite was only 16% compared to the Ga adsorption of 99.4 % under the pure Ga solution, thus, representing the influences of the other leachates in the solution, which are minimizing the Ga adsorption onto the zeolite HY and providing an opportunity for future studies on the different mechanisms involved.

Efficient recovery of gallium(III) from alkaline solution by electrosorption using biomass-derived carbon aerogel electrodes

Conductive biomass carbon aerogel with high adsorption performance for gallium in alkaline solution

Preparation of a gallium-imprinted resin-capacitive deionization electrode and study of its gallium adsorption performance

Highly selective capture of gallium from aqueous solutions using tetradentate amidoxime functionalized MIL-53(Al) nanofiber membranes

A hydrazine amidoxime crosslinked polyacrylonitrile resin for efficient extraction of gallium from vanadium-containing waste solution

Enhanced Gallium Extraction Using Silane-Modified Mesoporous Silica Synthesized from Coal Gasification Slag

Fabrication of peptide-encapsulated sodium alginate hydrogel for selective gallium adsorption

Sorption Extraction of Gallium from Alumina-Alkaline Solutions

Recovery of Gallium from Bauxite Residue Using Combined Oxalic Acid Leaching with Adsorption onto Zeolite HY

Uniform macroporous amidoximated polyacrylonitrile monoliths for gallium recovery from Bayer liquor

Improvement of extraction technology and electrotechnological equipment for obtaining gallium from alumina production solutions

Selective isolation of gallium and indium from waste photovoltaic modules facilitated by extractant-mesoporous activated carbon composites

Enhanced adsorption and separation of gallium using silica-based P507-TBP/SiO2–P adsorbent from sulfuric acid solution

Gallium recovery from red mud: Integration of solvent extraction and siderophore assisted technologies

The Effective Separation of Gallium, Vanadium, and Aluminum from a Simulated Bayer Solution by Resin Exchange

Multiwall Carbon Nanotubes/Spherical Glassy Carbon as Environmentally Friendly Adsorption Materials Utilized in Adsorptive Stripping Voltammetry for the Determination of Trace Amounts of Ga(III)

Preparation of 4-Amino-3-hydrazino-1,2,4-triazol-5-thiol-Modified Graphene Oxide and Its Greatly Enhanced Selective Adsorption of Gallium in Aqueous Solution

Recovery of gallium by silica‐based polymer TBP / SiO 2 ‐P obtained from hydrochloric acid solution

α‐Ga2O3@chitosan‐derived carbon as high‐performance anode for lithium‐ion batteries

Preparation of graphene-based surface ion-imprinted adsorbent for Ga(III) selective extraction from acid leaching of fly ash

Evaluation of Functionalized Amberlite Type XAD7 Polymeric Resin with L-Valine Amino Acid Performance for Gallium Recovery