Selective isolation of gallium and indium from waste photovoltaic modules facilitated by extractant-mesoporous activated carbon composites

Wenxuan Wang,Xinhai Xu,Dengguo Lai,Qingxin Xu,Jie Li,Yin Wang

DOI: https://doi.org/10.1016/j.seppur.2023.125510

IF: 8.6

2023-11-02

Separation and Purification Technology

Abstract:With the expanded installation and decommission of photovoltaic modules, the recovery of critical metals involved, such as gallium (Ga) and indium (In), is becoming an important issue. Liquid–liquid extraction, as a conventional recovery method, is always accompanied by serious emulsification, poor phase-separation, and huge volatile organic solvent consumption. Here, a more efficient and environmentally benign solid adsorbent was innovatively prepared by combining P507 with coconut shell-derived mesoporous activated carbon (P507@MAC) for Ga and In recovery. Surprisingly, P507@MAC retained an excellent selectivity for In 3+ from the coexisting ions (Al 3+ , Zn 2+ , Cd 2+ , Cu 2+ , and Mg 2+ ), and the selectivity for Ga 3+ was actually increased compared to P507. Unexpectedly high adsorption capacities of P507@MAC for Ga 3+ (67.0 mg·g −1 ) and In 3+ (52.6 mg·g −1 ) were found to be 1.85 and 1.23 times the accumulation of MAC and P507, respectively, and much superior to that of P507-impregnated resin (11.8 mg·g −1 (Ga 3+ ) and 36.5 mg·g −1 (In 3+ )). Moreover, the adsorption capacity of this novel adsorbent demonstrated no significant decrease over 6 cycles. Such desirable capture capability of Ga 3+ and In 3+ was ascribed to the rich mesopores and high surface area of MAC, providing adequate adsorption sites for phosphoryl groups and metal ions. Going forward, by demonstrating successful Ga 3+ and In 3+ separation from the leaching solution of waste CIGS photovoltaic modules, the extractant-MAC composites might provide a promising and industry-compatible approach for valuable metal recovery.

engineering, chemical