Abstract:On-chip frequency upconversion of a near-infrared (NIR) Kerr comb in a χ(2) and χ(3) system provides a convenient route to extending the comb spectra into the visible band. Yet to date, only limited visible or near-visible comb lines have been obtained using this scheme. In this work, we demonstrate the generation of multiple near-visible comb lines based on spectral translation from a broadband NIR Kerr comb. This physical process is implemented in an aluminum nitride (AlN)-on-sapphire microring, where we achieve a wideband frequency upconversion by incorporating the phase-mismatched fundamental and first-order near-visible modes. Upon tuning the pump into the resonance with sufficient power, we attain a broadband NIR Kerr comb and 153 corresponding near-visible comb lines in 720–840 nm with a reasonable efficiency over 4.1 × 10−5%. The wideband frequency upconversion can be adapted to on-chip frequency stabilization of self-referenced microcombs, as required for precision optical clocks and frequency metrology.On-chip frequency upconversion of a near-infrared (NIR) Kerr comb in a χ(2) and χ(3) system provides a convenient route to extending the comb spectra into the visible band. Yet to date, only limited visible or near-visible comb lines have been obtained using this scheme. In this work, we demonstrate the generation of multiple near-visible comb lines based on spectral translation from a broadband NIR Kerr comb. This physical process is implemented in an aluminum nitride (AlN)-on-sapphire microring, where we achieve a wideband frequency upconversion by incorporating the phase-mismatched fundamental and first-order near-visible modes. Upon tuning the pump into the resonance with sufficient power, we attain a broadband NIR Kerr comb and 153 corresponding near-visible comb lines in 720–840 nm with a reasonable efficiency over 4.1 × 10−5%. The wideband frequency upconversion can be adapted to on-chip frequency stabilization of self-referenced microcombs, as required for precision optical clocks and frequency me...

A Microwave Comb Generator Based on AlGaN/GaN Heterostructure Schottky Diodes Nonlinear Transmission Line

Nonlinear transmission line implemented as a combined pulse forming line and high-power microwave source

Electrically Tunable Diode-Based Nonlinear Transmission Line

Wide Band Gap Semiconductor High-Power Coherent Thz Source

Evaluation of Power and Linearity at 30 GHz in AlGaN/GaN HEMT Fabricated by Integrating Transistors With Multiple Threshold Voltages

RF Linearity and Improved Transconductance of ScAlN/GaN HEMT with Novel Inverse L-shaped Gate Structure

Efficient and Reconfigurable Soliton Microcomb Source Based on the 400-Nm-thick Si3N4 Platform

A Novel 220-Ghz GaN Diode On-Chip Tripler with High Driven Power

Microwave Photonic Devices Based on High-Q AlN Microring Resonators

A High-Rf-bandwidth, High-if-bandwidth Monolithic Terahertz Heterodyne Receiver Based on AlGaN/GaN Nonlinear Transmission Lines As a Local Oscillator and Mixer

Electrical Solitons for Microwave Systems: Harmonizing Nonlinearity and Dispersion with Nonlinear Transmission Line

Optimization of linearity at high electrical field for dual threshold coupling AlGaN/GaN HEMT applied in Ka-band applications

Generation of multiple near-visible comb lines in an AlN microring via χ(2) and χ(3) optical nonlinearities

Sub-milliwatt, widely-tunable coherent microcomb generation with feedback-free operation

An electrically-pumped WGM microlaser realized in an n-AlGaN/n-ZnO:Ga microwire/Pt/MgO/p-GaN double-heterojunction device

Al0.3Ga0.7N/Al0.05Ga0.95N/GaN Composite-Channel HEMTs with Enhanced Linearity

Electrically-pumped WGM microlaser realized in n-AlGaN/n-ZnO:Ga microwire/Pt/MgO/p-GaN double heterojunction device

K-band microwave generation using a MgF2 soliton microcomb

AlN/GaN/InGaN Coupling-Channel HEMTs for Improved g m and Gain Linearity

Integrated High-Q Crystalline AlN Microresonators for Broadband Kerr and Raman Frequency Combs

A 220 GHz Frequency Tripler Based on AlN Substrate