Abstract:Laser-induced breakdown spectroscopy (LIBS) is an ideal real-time on-line method for the detection of minor elements in alloys. However, in the case of high-density plasma generated by LIBS, the self-absorption is usually an undesired effect because it not only reduces the true line intensity, introduces nonlinear effects in the growth of line intensity versus the content of the emitting species, but also affects the characterization parameters of the plasma, and finally affects the accuracy of quantitative analysis. Since the plasma electron temperature ( T ), radiation particle number density and absorption path length ( Nl ) determine the degree of self-absorption and affect the corrected spectral line intensity, a new self-absorption correction method based on temperature iteration is proposed. This method obtains the initial T through spectral line intensity, and calculates the self-absorption coefficient SA based on the initial Nl parameter to correct the spectral line intensity. Then a new T is obtained from the new spectral line intensity and the new SA is calculated to further correct the spectral line intensity. Through continuous calculation and correction of these two parameters, self-absorption correction is finally achieved. The experimental results of alloy steel samples showed that the linearity of Boltzmann plots was increased from 0.867 without self-absorption correction to 0.974 with self-absorption correction, and the linear correlation coefficient R 2 of the single variable calibration curve for Mn element increased from 0.971 to 0.997. The relative error of elemental content measurement has significantly improved from 4.32% without self-absorption correction to 1.23% with self-absorption correction. Compared with the commonly applied self-absorption correction methods, this method has obvious advantages of simpler programming, higher computation efficiency, and its independency of the availability or accuracy of Stark broadening coefficients. Moreover, this method can directly obtain the radiation particle number density and absorption path length, which is beneficial to the diagnosis and quantitative analysis of plasma.

Self-reversal Effect Elimination in Laser-Induced Breakdown Spectroscopy by Employing Single-Probe Microwave Radiation

Investigation of the multi-elemental self-absorption mechanism and experimental optimization in laser-induced breakdown spectroscopy

Self-absorption Reduction in Laser-Induced Breakdown Spectroscopy Using Laser-Stimulated Absorption

Investigation on Self-Absorption Reduction in Laser-Induced Breakdown Spectroscopy Assisted with Spatially Selective Laser-Stimulated Absorption

The signal quality improvement of laser-induced breakdown spectroscopy due to the microwave plasma torch modulation

Investigation of the self-absorption effect using time-resolved laser-induced breakdown spectroscopy.

Mechanisms and Efficient Elimination Approaches of Self-Absorption in LIBS

Reducing self-absorption effect by double-pulse combination in laser-induced breakdown spectroscopy

Multielemental Self-Absorption Reduction in Laser-Induced Breakdown Spectroscopy by Using Microwave-Assisted Excitation

Generation of High-Temperature and Low-Density Plasmas for Improved Spectral Resolutions in Laser-Induced Breakdown Spectroscopy

On the Improvement of Signal Repeatability in Laser-Induced Air Plasmas

Improving signal stability and analysis accuracy in laser-induced breakdown spectroscopy by multi-directional collection

Progress in the Correction of Self-Absorption Effect on Laser-Induced Breakdown Spectroscopy

Flame-assisted plasma modulation to improve the raw signal quality for laser-induced breakdown spectroscopy

Influence of Laser Wavelength on Self-Absorption Effect in Laser-Induced Breakdown Spectroscopy

Suppression of self-absorption in laser-induced breakdown spectroscopy using a double pulse orthogonal configuration to create vacuum-like conditions in atmospheric air pressure

Combination of Cylindrical Confinement and Spark Discharge for Signal Improvement Using Laser Induced Breakdown Spectroscopy

Plasma Modulation Using Beam Shaping to Improve Signal Quality for Laser Induced Breakdown Spectroscopy

Quantitative Analysis method of laser-induced breakdown spectroscopy based on temperature iterative correction of self-absorption effect

A numerical procedure for understanding the self-absorption effects in laser induced breakdown spectroscopy

Theoretical study on signal enhancement mechanism of coaxial DP-LIBS