Abstract:Modal updating is a crucial problem in Structure Health Monitoring (SHM) and has strongly attracted researchers' attentions. Recently the structures have been becoming much huger and more complex, so it's getting harder to update the global structural model precisely using the classical model updating methods. In general, only some local substructure model is important and it is not necessary to update the whole structure. Therefore the substructure technologies are important for that they require only few sensors and the local dynamic information to accurately update the interested substructure model. Usually the updating of the element stiffness is enough to reflect the damage and the structural dynamic performance. This paper proposes a concept of the Isolated Substructure. It aims at updating local substructure element stiffness only by the relative mode at the substructure location. The present Isolated Substructure refers to a new structure formed by isolating the substructure from the global structure. Then the substructure can be updated indirectly through updating the Isolated Substructure, such that the optimizing variables become much less and the convergent speed is fastened. The key process of this method is to construct the flexibility matrix of the Isolated Substructure by measured data. First the lower order frequencies and shape modes of the substructure are identified from the measured impulse response by utilizing Eigensystem Realization Algorithm (ERA), and the relative modal masses are estimated by Least Square Method (LSM); Second, according to its independence and convergence properties, the flexibility matrix corresponding to the substructure can be approximately constructed by the identified lower order modes and be improved by the calculated higher order modes from the theoretical model; and then utilizing the concept of the flexibility matrix, the substructure is isolated from the global structure through applying numerical supporting on the substructure boundary; synchronously the flexibility matrix of the Isolated Substructure is constructed from the advanced obtained flexibility matrix of the global structure, and is used to update the Isolated Substructure, that is, to equally update the substructure. The optimization method based on sensitivity idea is adopted, and the relative formulas are deduced. It makes the iteration and convergence faster. A numerical example of a plane truss separately with 5% or 10% rms Gaussian measurement error validates that the substructure can be updated effectively by the Isolated Substructure model updating method.

Finite Element Model Updating Using Incomplete Sets of Experimental Complex Modes

New Methods for Finite Element Model Updating Problems

Finite element model updating for repeated eigenvalue structures via the reduced-order model using incomplete measured modes

Fuzzy Cross-Model Cross-Mode Method And Its Application To Update The Finite Element Model Of Structures

Updating of Finite Element Model in Considering Mode Errors with Fuzzy Theory

Using incomplete complex modes for model updating of monopiled offshore wind turbines

Structural modal identification and MCMC-based model updating by a Bayesian approach

An updating method suitable for finite element model updating of large-scakled structures

Hierarchical Model Updating Strategy of Complex Assembled Structures with Uncorrelated Dynamic Modes

Updating the Finite Element Model of Large-Scaled Structures Using Component Mode Synthesis Technique.

Nonlinear finite element model updating with a decentralized approach

The Composite Methods of Updating Finite Element Models

Research of a model updating method based on matrix approximation theory

An Improved Optimal Elemental Method for Updating Finite Element Models

An iterative method for updating finite element models with connectivity constraints

Finite element model updating for structural applications

A direct method for model updating with incomplete measured data and without spurious modes

A New Stochastic Model Updating Method Based on Improved Cross-Model Cross-Mode Technique

ISOLATED SUBSTRUCTURE MODEL UPDATING BASED ON LOCAL MODE

New Iterative Method for Model Updating and Modal Expansion

Model updating of lattice structures: A substructure energy approach