Abstract:The mechanical properties of cementitious composites before and after exposure to high temperature are affected by calcium–silicate–hydrate (C–S–H) gels. To evaluate the effects of high temperature, plyvinyl alcohol (PVA) fiber content, and the cooling method on properties of cementitious composites, physical, mechanical, and microscopic tests were performed in this study. The target temperatures were 25, 100, 200, 300, 400, 600, and 800 °C. The PVA fiber contents were 0.0, 0.3, 0.6, 0.9, 1.2, and 1.5 vol%. The high-temperature resistance of PVA fiber-reinforced cementitious composite (PVA-FRCC) specimens was investigated through changes in their appearance, mass loss, compressive strength, splitting tensile strength, flexural strength, and microstructure. The results showed that PVA fibers reduced the probability of explosion spalling in the PVA-FRCC specimens exposed to high temperatures. The mass loss rate of samples exposed to temperatures below 200 °C was small and lower than 5%, whereas a significant mass loss was observed at 200 °C to 800 °C. A small rise in the cubic compressive and splitting tensile strengths of samples was found at 400 °C and 300 °C, respectively. Below 400 °C, the fibers were beneficial to the mechanical strength of the PVA-FRCC specimens. Nevertheless, when the temperature was heated above 400 °C, melted fibers created many pores and channels, which caused a decrease in the strength of the specimens. The method of cooling with water could aggravate the damage to the cementitious composites exposed to temperatures above 200 °C. High temperature could lead to the decomposition of the C–S–H gels of the PVA-FRCC samples, which makes C–S–H gels lose their bonding ability. From the perspective of the microstructure, the structure of PVA-FRCC samples exposed to 600 °C and 800 °C became loose and the number of microcracks increased, which confirmed the reduction in macro-mechanical properties.

Correction To: Micromechanics-based Analysis of PVA–ECC after Thermal Exposure

Mechanical properties of polyvinyl alcohol-basalt hybrid fiber engineered cementitious composites with impact of elevated temperatures

Mechanical Properties of Polyvinyl Alcohol Fiber-Reinforced Cementitious Composites after High-Temperature Exposure

Effect of Sub-Elevated Temperature on Mechanical Properties of ECC with Different Fly Ash Contents

Mechanical properties of PVA fiber reinforced cementitious composites (PVA-FRCC) after high temperature

Thermal resistance of high strength PVA fiber reinforced engineered cementitious composites containing basalt fiber

Effects of environmental temperature on the mechanical properties of polyethylene fiber-engineered cementitious composites

Study on Mechanical Properties of (1 % PVA Fiber +1 % Steel Fiber) PS‐ECC under the Coupling Effects of Elevated Temperature and Dynamic Loads

Effect of Temperature on Micromechanical Properties of Pol-yvinyl Alcohol Fiber–Matrix Interface and Uniaxial Tensile Properties of High-Ductility Cementitious Composites

Mechanical properties of engineered cementitious composites exposed to elevated temperatures

Microstructure and Mechanical Properties of High-Toughness Fiber-Reinforced Cementitious Composites after Exposure to Elevated Temperatures

High Temperature Flexural Deformation Properties of Engineered Cementitious Composites (ECC) with Hybrid Fiber Reinforcement

Damage of Ecological High Ductility Cementitious Composites After Exposed to High Temperature

Temperature Impact on the Micro-Structures and Mechanical Properties of High-Strength Engineered Cementitious Composites

Effect of Temperature on the Low-Velocity Impact Behaviors of Engineered Cementitious Composite

Experimental study and theoretical analysis of ECC type I fatigue fracture after subjected to sub-high temperature

Effect of high temperature on morphologies of fibers and mechanical properties of multi-scale fiber reinforced cement-based composites

Mechanical Properties and Carbonation Durability of Engineered Cementitious Composites Reinforced by Polypropylene and Hydrophilic Polyvinyl Alcohol Fibers

Research Progress and Performance Evaluation of Polyvinyl Alcohol Fiber Engineered Cementitious Composites

Effect of Cooling Method on Physical and Mechanical Properties of PVA Fiber-Reinforced High-Strength Concrete Exposed to High Temperature

Thermal and Mechanical Properties of Ultrahigh Toughness Cementitious Composite with Hybrid PVA and Steel Fibers at Elevated Temperatures