Abstract:The mechanical properties of cementitious composites before and after exposure to high temperature are affected by calcium–silicate–hydrate (C–S–H) gels. To evaluate the effects of high temperature, plyvinyl alcohol (PVA) fiber content, and the cooling method on properties of cementitious composites, physical, mechanical, and microscopic tests were performed in this study. The target temperatures were 25, 100, 200, 300, 400, 600, and 800 °C. The PVA fiber contents were 0.0, 0.3, 0.6, 0.9, 1.2, and 1.5 vol%. The high-temperature resistance of PVA fiber-reinforced cementitious composite (PVA-FRCC) specimens was investigated through changes in their appearance, mass loss, compressive strength, splitting tensile strength, flexural strength, and microstructure. The results showed that PVA fibers reduced the probability of explosion spalling in the PVA-FRCC specimens exposed to high temperatures. The mass loss rate of samples exposed to temperatures below 200 °C was small and lower than 5%, whereas a significant mass loss was observed at 200 °C to 800 °C. A small rise in the cubic compressive and splitting tensile strengths of samples was found at 400 °C and 300 °C, respectively. Below 400 °C, the fibers were beneficial to the mechanical strength of the PVA-FRCC specimens. Nevertheless, when the temperature was heated above 400 °C, melted fibers created many pores and channels, which caused a decrease in the strength of the specimens. The method of cooling with water could aggravate the damage to the cementitious composites exposed to temperatures above 200 °C. High temperature could lead to the decomposition of the C–S–H gels of the PVA-FRCC samples, which makes C–S–H gels lose their bonding ability. From the perspective of the microstructure, the structure of PVA-FRCC samples exposed to 600 °C and 800 °C became loose and the number of microcracks increased, which confirmed the reduction in macro-mechanical properties.

Study on Mechanical Properties of (1 % PVA Fiber +1 % Steel Fiber) PS‐ECC under the Coupling Effects of Elevated Temperature and Dynamic Loads

Dynamic Mechanical Response, Energy Absorption Capacity, and Constitutive Modeling of Polypropylene Fiber-Reinforced Foamed Concrete under High Temperature

Mechanical properties of polyvinyl alcohol-basalt hybrid fiber engineered cementitious composites with impact of elevated temperatures

Mechanical Properties and Carbonation Durability of Engineered Cementitious Composites Reinforced by Polypropylene and Hydrophilic Polyvinyl Alcohol Fibers

Effect of high temperature on morphologies of fibers and mechanical properties of multi-scale fiber reinforced cement-based composites

Effects of environmental temperature on the mechanical properties of polyethylene fiber-engineered cementitious composites

High Temperature Flexural Deformation Properties of Engineered Cementitious Composites (ECC) with Hybrid Fiber Reinforcement

Mechanical Properties of Polyvinyl Alcohol Fiber-Reinforced Cementitious Composites after High-Temperature Exposure

Effect of PE Fiber Content on Mechanical Behavior of Cementitious Composite

Comparison of compressive, flexural, and temperature-induced ductility behaviours of steel-PVA hybrid fibre reinforced OPC and geopolymer concretes after high temperatures exposure

Effect of Cooling Method on Physical and Mechanical Properties of PVA Fiber-Reinforced High-Strength Concrete Exposed to High Temperature

Mechanical properties of PVA fiber reinforced cementitious composites (PVA-FRCC) after high temperature

Effect of Multiscale Fibers and Cenospheres on the Uniaxial Tensile Behavior of Ultra-High Performance Concrete Subjected to High Temperatures

Dynamic tensile properties of steel fiber reinforced polyethylene fiber-engineered/strain-hardening cementitious composites (PE-ECC/SHCC) at high strain rate

Thermal resistance of high strength PVA fiber reinforced engineered cementitious composites containing basalt fiber

Microstructure and Mechanical Properties of High-Toughness Fiber-Reinforced Cementitious Composites after Exposure to Elevated Temperatures

Correction To: Micromechanics-based Analysis of PVA–ECC after Thermal Exposure

Properties of Polyvinyl Alcohol-Steel Hybrid Fiber-Reinforced Composite with High-Strength Cement Matrix

COMPRESSIVE AND TENSILE STRENGTHS OF REACTIVE POWDER CONCRETE WITH HYBRID FIBRES AT ELEVATED TEMPERATURES

Thermal and Mechanical Properties of Ultrahigh Toughness Cementitious Composite with Hybrid PVA and Steel Fibers at Elevated Temperatures

Effect of Temperature on the Low-Velocity Impact Behaviors of Engineered Cementitious Composite