Abstract:We present an all-fiber, fully open Fabry-Perot interferometer (FPI) cavity that is suitable for fluidic measurement applications. Fabrication of the FPI involves the alignment and bonding of three optical fiber sections using either ceramic glue or low-temperature melting glass. The fabrication procedure allows the protection of the cleaved optical fiber end faces, which serve as the two mirrors of the FPI, from damage, thus ensuring the high visibility of the FPI sensor. The FPI's complete openness permits the analyte of interest fluids to flow smoothly into the cavity and interact directly with the light, obviating the need for additional assistance. The fabrication experiment demonstrates that the fabrication procedure can readily achieve a visibility of over 20 dB. Refractive index testing indicates that the sensor exhibits a sensitivity of over 1116 nm/RIU within the range of 1.334-1.375. A comparison of temperature investigations indicates that the fully open cavity FPI fabricated by bonding with low-temperature melting glass exhibits relatively lower temperature immunity than that bonded with ceramic glue. Both have a relatively low temperature fluctuation within the temperature range of 40°C-100°C, with less than 3 nm and 4.5 nm in the over 60°C changes, respectively. Our proposed fully open FPI is an economical, robust, and simple-to-fabricate structure with the potential for mass production. This renders it an appealing option for practical optofluidics applications.

A High-Resolution Liquid-Level Sensor Based on Fabry–Perot Interferometer with Fiber Laser Intracavity Sensing

Sensitivity-enhanced Optical Sensor Based on Multilayer Coated Fabry–Pérot Interferometer

Power-type Liquid-Level Sensor for High Refractive Index Liquid Based on Long-Period Fiber Grating

A thin-core fiber modal interferometer for liquid-level sensing

Intensity-Interrogated Sensor Based on Cascaded Fabry–Perot Laser and Microring Resonator

Self-Temperature Compensated Fiber-Optic Liquid Level Sensor With Ultra-Long Linear Range Using Quasi-Single Modal Interferometer

Fiber Optic Liquid Level Sensor Based on Integration of Lever Principle and Optical Interferometry

Highly Sensitive Liquid-Level Sensing Based on Microwave Frequency Domain Reflectometry and Interferometry

Implementation and Characterization of Liquid-Level Sensor Based on a Long-Period Fiber Grating Mach–Zehnder Interferometer

High-resolution liquid level sensor utilizing a microwave photonics interrogated multicore fiber interferometer

Low Refractive-Index and Temperature Crosstalk Fiber-Optic Liquid Level Sensor Based on Cascaded Quasi-Microfiber and Double-Cladding Fiber Structure

White-light interferometric fiber optic liquid level sensor based on MEMS Fabry-Perot cavity

Optical Fiber Fabry-Perot Interferometer Cavity Fabricated by Femtosecond Laser-Induced Water Breakdown for Refractive Index Sensing.

An Open-Cavity Fiber Fabry-Perot Interferometer Fabricated by Femtosecond Laser Micromachining for Refractive Index Sensing

In-line fiber optic optofluidic sensor based on a fully open Fabry-Perot interferometer

Liquid refractive index sensor with three-cascaded microchannels in single-mode fiber fabricated by femtosecond laser-induced water breakdown

Ultrasensitive Refractive Index Fiber Sensor Based on High-Order Harmonic Vernier Effect and a Cascaded FPI.

Liquid Level Sensor Based on a V-Groove Structure Plastic Optical Fiber

High Resolution Refractive Index Sensing with Dual-Wavelength Fiber Laser

Highly sensitive liquid level and temperature sensors based on all-fiber intermodal interferometers