Abstract:The Self-sensing Active Magnetic Bearings (SSAMBs) which feature for the simplification of independent displacement sensors, contribute to both cost reduction and convenience in control and assembly. The key point of this technique is to accurately estimate rotor position signals directly from coil voltages or currents, thus the actuator itself also serves as a virtual displacement sensor. Although several feasible approaches have been proposed to realize the self-sensing process, there still lie limitations in estimation accuracy, robustness and dynamic performance of the system. In fact, due to the nonlinear property of the self-sensing process, few accurate models are available for quantitative analysis of the estimation accuracy, and this restricts further development of this technique. Focusing on the modulation type SSAMBs, an accurate analytical model of the self-sensing in frequency domain is firstly established in this paper. Eddy current effects and filter properties are also considered for better accuracy. Based on this model, we evaluate possible estimation error sources during the self-sensing process, and investigate if the estimation accuracy can be improved fundamentally by selecting main system parameters properly. In this way, the estimation accuracy gets further improved under existing compensation methods, and better system robustness and dynamic performance can be achieved. Finally, the analytical model and associated conclusions are validated through static experiment, 4-Degree of Freedom (DOF) self-sensing rotor levitation experiment and 0-5000 rpm rotating operation experiment on a 4-DOF rigid rotor-radial SSAMBs platform. (C) 2016 Elsevier B.V. All rights reserved.

Optimization of Electrostatic Sensors for Rotational Speed Measurement of a Metallic Rotor

Rotational Speed Measurement Using Electrostatic Sensors with Single or Double Electrodes

Rotational Speed Measurement Using Single and Dual Electrostatic Sensors

Rotational Speed Measurement Through Electrostatic Sensing and Correlation Signal Processing

Performance Assessment of the Rotational Speed Measurement System Based on a Single Electrostatic Sensor

Rotational Speed Measurement Using Electrostatic Sensors and Correlation Signal Processing Techniques.

Effects of Material Type and Surface Roughness of the Rotor on the Electrostatic Sensing Based Rotational Speed Measurement.

A novel electret rotational speed sensor

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

Position Estimation Accuracy Improvement Based on Accurate Modeling of Self-Sensing Active Magnetic Bearings

Research on Wide-band Measuring Rotation Speed SystemBased on Magnetoelectric Rotational Speed Sensor

Evaluation of the conductivity and permeability of rotor shaft material through electrical runout using FEM

An EM Induction Hi-Speed Rotation Angular Rate Sensor

Rotational Speed Measurement Through Image Similarity Evaluation and Spectral Analysis

A novel rotation detection method based on the capacitance principle and triboelectric effect

Non-contact Strip Speed Measurement Using an Electrostatic Sensor Array and Data Fusion Technique

An Improved Method to Estimate Initial Rotor Position for Surface-Mounted Permanent Magnet Synchronous Motors

Intelligent Condition Monitoring Of Rotating Machinery Through Electrostatic Sensing And Signal Analysis

Transmission and measurement characteristics evaluation of surface acoustic wave sensor on rotating spindle in machine tools

Radial Vibration Measurement of Rotary Shafts Through Electrostatic Sensing and Hilbert-Huang Transform

Development of electrical runout online measurement system based on eddy current technique and laser triangulation