Abstract:Rotational speed measurement is important for many applications. Here, a noncontact rotational speed test method based on the detection of the periodically perturbed near-field microwave of an open-ended waveguide is proposed. Both simulations and experiments were conducted to verify the near-field microwave rotational speed sensor. The constructed rotation speed sensing system was composed of a standard open-ended WR-42 waveguide (in our measurements, a waveguide-to-coaxial adapter was used to represent an open-ended waveguide) working at ~18 GHz, a radio frequency (RF) circulator, a signal generator, a, RF detector and an oscilloscope. A rotating fan to be measured was placed close to the waveguide’s mouth and, thus, the waveguide’s reflection coefficient was periodically modulated by the rotating fan blades. Then, the RF detector converted this varying reflection coefficient into a direct current (DC) voltage, namely, a periodical waveform. Finally, the rotational speed of the fan could be extracted from this waveform. Measurements using both the proposed near-field microwave method and conventional optical transmission/reflection methods were conducted for verification. The effect of the rotating fan’s location relative to the waveguide’s mouth was also studied. The results show the following: 1. The proposed method works well with a rotational speed of up to ~5000 RPM (rounds per minute), and an accuracy of 1.7% can be achieved. 2. Metallic or non-metallic fan blades are all suitable for this method. Compared with the existing radar method, the proposed method may be advantageous for rotation detection in a constrained space.

Research on Wide-band Measuring Rotation Speed SystemBased on Magnetoelectric Rotational Speed Sensor

Rotational Speed Measurement Through Electrostatic Sensing and Correlation Signal Processing

Rotational Speed Measurement Using Electrostatic Sensors and Correlation Signal Processing Techniques.

Rotational Speed Measurement Using Single and Dual Electrostatic Sensors

Speed Condition Monitoring of Rotating Machinery Using Electrostatic Method

A novel electret rotational speed sensor

A Passive Non-Interference Scheme for Synchronously Measuring Multiple Parameters With Single Sensing Unit

Optimization of Electrostatic Sensors for Rotational Speed Measurement of a Metallic Rotor

Low-Frequency Noise Suppression Method Based on Rotational Modulation for Vectorized Magnetic Sensor

Rotational Speed Measurement Using Electrostatic Sensors with Single or Double Electrodes

A novel rotation detection method based on the capacitance principle and triboelectric effect

High SNR magnetoelectric sensor with dual working modes for wideband magnetic field detection

An EM Induction Hi-Speed Rotation Angular Rate Sensor

Study of rotating speed measurement system based on light - sensitive Z - element

Noncontact Rotational Speed Measurement with Near-Field Microwave of Open-Ended Waveguide

Performance Assessment of the Rotational Speed Measurement System Based on a Single Electrostatic Sensor

High Precision Control System Design and Implementation of Outer-Rotor Permanent Magnet Motor with Dual Magnetic Sensors

Orthogonal On-Rotor Sensing Vibrations for Condition Monitoring of Rotating Machines

Instantaneous Rotating Speed Estimation Using Adaptive Short-time Chirp-Fourier Transform and Its Applications

A Simple And Reliable Sensor For Accurate Measurement Of Angular Speed For Low Speed Rotating Machinery

Detection Electronics of Magnetic Sensor Based on Michelson Interferometer