Abstract:Ultrasonic flowmeters (UFMs) based on the principle of transit time difference are widely used in process industries. The transit time difference is obtained through analyzing received acoustic signals generated by a couple of transducers located upstream and downstream respectively. The quality of received acoustic signal will directly affect the measurement accuracy of UFM. For this reason, a measurement-calculation coupled approach combining measurement tools and numerical simulation for calculating the acoustic signal of UFM is proposed in this paper. The method can predict the acoustic signals of UFM with different flowrates. First, important boundary condition (vibration velocity on transmitter transducer surface) is measured by measurement tool, which can reduce computational complexity and also avoid modeling transmitter transducers. Second, simulating the wave propagation (difficult to access experimentally) within moving medium by using the measured vibration velocity. Third, obtaining the transfer function of receiver by comparing estimated force acting on the receiver transducer surface with measured voltage signal from receiver, which can avoid modeling receiver transducer. Finally, predicting the received acoustic signal at different flowrates by using the transfer function. The rationality of predicted data was validated by comparing experimental and predicted acoustic signal on receiver transducer at different flowrates. A good agreement between simulated and experimental data was obtained, which means that the working processes of the acoustic signal generated by actual transducers inside UFMs can be accurately predicted based on this method. Analysis of the predicted results will provide good guides and advices to the design of UFMs involving actual application.

A time-of-flight estimation method based on central frequency matching for ultrasonic flowmeters

A Method to Avoid the Cycle-Skip Phenomenon in Time-of-flight Determination for Ultrasonic Flow Measurement

A Method Combining Measurement Tool and Numerical Simulation for Calculating Acoustic Signals of Ultrasonic Flowmeter

Similarity Judgment-Based Double-Threshold Method for Time-of-Flight Determination in an Ultrasonic Gas Flowmeter

Applications of digital signal processing methods in TOF calculation of ultrasonic gas flowmeter

A simple and easy-implemented time-of-flight determination method for liquid ultrasonic flow meters based on ultrasonic signal onset detection and multiple-zero-crossing technique

A Model-Based Transit-Time Ultrasonic Gas Flowrate Measurement Method

Flight Time Measurement Methodology for Small-Caliber Clamp-on Ultrasonic Flowmeters

Estimation of Ultrasonic Signal Onset for Flow Measurement

A Fault-Tolerant Flow Measuring Method Based on PSO-SVM with Transit-Time Multipath Ultrasonic Gas Flowmeters

Signal Processing Method Based on Connection Fitting of Echo Peak Point with a Large Slope for Ultrasonic Gas Flow Meter.

Design and Implementation of an Ultrasonic Flowmeter Based on the Cross-Correlation Method

Modelling of received ultrasonic signals based on variable frequency analysis

Multipath Ultrasonic Gas Flow-Meter Based on Multiple Reference Waves

Note: Ultrasonic Gas Flowmeter Based on Optimized Time-of-flight Algorithms.

Electrochemical time of flight flow sensor

A Model-Based Hybrid Ultrasonic Gas Flowmeter

Design of High-Accuracy Ultrasonic Flowmeter

Method of Ultrasonic Flow Rate Measure Based on Delta-T and TDC-GP2

Flow Profile Identification with Multipath Transducers

Time Delay Study of Ultrasonic Gas Flowmeters Based on VMD–Hilbert Spectrum and Cross-Correlation