Highly Accurate Time-of-Flight Measurement Technique Based on Phase-Correlation for Ultrasonic Ranging
Md. Omar Khyam,Shuzhi Sam Ge,Xinde Li,Mark R. Pickering
DOI: https://doi.org/10.1109/jsen.2016.2631244
IF: 4.3
2017-01-01
IEEE Sensors Journal
Abstract:Ultrasonic-based distance measurements using time-of-flight (TOF) is a fundamental technique for different applications across a wide variety of fields. In general, cross correlation between a transmitted and received signal is considered to be the optimal TOF estimation technique, which produces a peak at the time delay between them. Cross correlation provides a superior performance in conjunction with a linear chirp. However, as its accuracy depends on the width of the peak, which is inversely proportional to the signal's bandwidth, it can only be said to be highly accurate if the reflected signal at the receiver is separated in time by more than the width of the correlation peak; otherwise, errors are introduced into the system. To improve its accuracy, the bandwidth of the transmitted signal must be increased, which increases the system cost. In this paper, to solve this problem, a threshold-based phase-correlation technique is proposed, which is able to provide a much narrower peak than cross correlation without increasing the signal's physical bandwidth. To evaluate the proposed method, in a controlled environment, two experiments were performed under low and high multipath conditions. For an operational range of 600 mm (indoor), the root-mean-square errors were [0.10, 0.56] mm and [0.19, 1.19] mm for low and high multipath environments, respectively, which indicate that the proposed technique is precise enough to support high accuracy applications.