Abstract:Time of flight diffraction (TOFD) technique and phased array ultrasonic testing (PAUT) have been developed rapidly in the last decades. They have shown the tendency to replace traditional volumetric weld inspection techniques, such as radiography and pulse-echo ultrasonic testing. The TOFD inspection with s ector can phased array not only retained the high positioning accuracy of TOFD technique, but also obtained higher detection sensitivity over the entire range of test piece thickness . In this paper, the model of a 48.0mm thick carbon steel weld was establis hed, n which the depth of defects was from 2.0mm to 46.0mm and the heigh t was from 1.0mm to 3.0mm. The TOFD technique combined with sector scan phased arra y method, i.e. PA-TOFD, was simulated based on the model with CIVA softwar e. A series of TOFD D scanning images under different sector scanning angles wer obtained and analyzed in one run. The echo amplitude and the positioning ac curacy of defects measured by PA-TOFD method were compared with that of conventio al TOFD technique respectively. Result shows that the PA-TOFD method can accurately determine the depth of defects by extracting the defect signals at favor ble angle, and the defects with different depths can achieve higher echo amplitude. This method has the advantages of phased array technique, such as beam steer ing, energy focusing, as well as the high positioning accuracy of TOFD technique. I t is significant for improving the reliability and efficiency of weld detection.

Improved Hilbert Transform to Process the Ultrasonic TOFD Signal

Enhancing Ultrasonic Time-of-flight Diffraction Measurement Through an Adaptive Deconvolution Method

A flaw echo detection method based on S-transformation and time-frequency spectrum spatial filtering

Ultrasonic signal identification by empirical mode decomposition and Hilbert transform

Hilbert Transform Based Time-of-Flight Estimation of Multi-Echo Ultrasonic Signals and Its Resolution Analysis.

Ultrasonic TOFD detection of near surface defects based on adaptive filtering

Ultrasonic Nondestructive Testing Accurate Sizing and Locating Technique Based on Time-of-Flight-Diffraction Method

TOFD image registration based on adaptive threshold of scale invariant feature transform algorithm

Time Resolution Improvement of Ultrasonic Tofd Testing by Pulse Compression Technique

A New Defect Detection Method of Ultrasonic TOFD Image for Lateral Waves Suppression

Improved Amplitude Extraction Method for Attenuation Reconstruction of Transmissive Ultrasonic Tomography

Reducing Dead Zone in Ultrasonic Time-of-Flight Diffraction (TOFD): A Review

Research of ultrasonic TOFD image calibration based on mathematical morphology algorithm

Applications of digital signal processing methods in TOF calculation of ultrasonic gas flowmeter

A novel technique for improving of ultrasonic TOFD data

Accurate TOF Measurement of Ultrasonic Signal Echo from the Liquid Level Based on a 2-D Image Processing Method

Study of PA-TOFD Inspection based on Numerical Simulation

Design of TOFD receiving filter on DSP builder

Segmentation of Ultrasonic TOFD Testing Image Based on Watershed Method

Research of Doppler Frequency Shift Estimation and Enhancement Algorithm for Ultrasonic TOFD Image

Shallow Buried Defect Testing Method Based on Ultrasonic TOFD