Abstract:The lamellae deformation and cavitation behavior of annealed isotactic polypropylene during uniaxial stretching are comprehensively investigated by in situ synchrotron small-angle X-ray scattering and wide-angle X-ray scattering. We reveal how lamellae deformation occurs in the time scales of elastic deformation, intralamellar slip, and melting-recrystallization, separated by three critical strains which are only rarely influenced by annealing. Strain I (0.1) marks the end of elastic deformation and the onset of intralamellar slip, beyond which the crystallinity decreases gradually. Strain II (0.45) signifies the start of the recrystallization process, from where the long period in the stretching direction begins to decrease from its maximum and the polymer chains in the crystal start to orient along the stretching direction. The energy required for melting arises from the friction between the fragmented lamellae produced by intralamellar slip. Strain III (0.95) denotes the end of the recrystallization process. Beyond the strain of 0.95, the long period and the crystal size remain nearly unchanged. During further stretching, the newly formed lamellae serve as the anchoring points for polymer chains in the amorphous phase. The extension of the polymer chains in between lamellae triggers the strain hardening behavior. On the other hand, annealing significantly decreases the critical strain for voids formation and increases the voids number but restricts the void size. For those samples annealed at a temperature lower than 90 degrees C, voids are formed between strain II and strain III, and voids are oriented in the stretching direction once they are formed. However, for those samples annealed at a temperature higher than 105 degrees C, voids are formed between strain I and strain II. In this case, voids are initially oriented with their longitudinal axis perpendicular to the stretching direction and then transferred along stretching direction via void coalescence. Additionally, the formation of voids influences neither the critical strains for lamellae deformation nor the final long period, the orientation of polymer chains, or the crystal size. The final long period, the orientation of polymer chains in the crystal, and the crystal size are determined only by the stretching temperature through melting-recrystallization.

Tensile Creep Failure of Isotactic Polypropylene under the Strain Criterion

Modeling the Effect of Physical Aging on the Stress Response of Amorphous Polymers Based on a Two-Temperature Continuum Theory

Creep-induced Anisotropy in Covalent Adaptable Network Polymers.

Experimental Study of Mechanical Properties of CFRP under Different Strain Rates and Temperatures

The nonlinear time-dependent response of isotactic polypropylene

Microstructural Evolution of Isotactic‐Polypropylene During Creep: an in Situ Study by Synchrotron Small‐Angle X‐Ray Scattering

Investigation of Tensile Creep Behavior for High-Density Polyethylene (HDPE) via Experiments and Mathematical Model

The effect of strain rate on the viscoplastic behavior of isotactic polypropylene at finite strains

Time–temperature Correlations of Amorphous Thermoplastics at Large Strains Based on Molecular Dynamics Simulations

The effect of annealing on the elastoplastic and viscoelastic responses of isotactic polypropylene

Molecular Orientations and True Stress−Strain Relationship in Isotactic Polypropylene Film

Nonlinear creep characteristics of extruded Poly (vinylidene fluoride-co-hexafluoropropylene) with high ß-phase content under extreme conditions: Design, characterization, and modeling

Application of an interpenetrating network model to the solid deformation of a quenched isotactic polypropylene film

Structural Characteristics of Fibrillar Crystals in Uniaxially Stretched Isotactic Polypropylene Dominated by Temperature and Strain

Structure/property relationship of semi-crystalline polymer during tensile deformation: A molecular dynamics approach

An Investigation of the Effect of High-Temperature Cyclic Straining and Creep Loading on Tensile Mechanical Properties of GH4145/SQ Alloy

Real Time Synchrotron SAXS and WAXS Investigations on Temperature Related Deformation and Transitions of Β-Ipp with Uniaxial Stretching

Influence of strain rate and temperature on mechanical properties of carbon woven-ply PPS thermoplastic laminates under dynamic compression

Interplay between crystallization behaviors and extensional deformation of isotactic polypropylene and its blend with poly(ethylene-co-octene)

Critical Strains for Lamellae Deformation and Cavitation During Uniaxial Stretching of Annealed Isotactic Polypropylene

Thermo-Mechanical and Creep Behaviour of Polylactic Acid/Thermoplastic Polyurethane Blends