Abstract:Age hardening at 160 degrees C was performed in an Al-6.0 wt.%Zn-2.3 wt.%Mg-I.8 wt.%Cu-0.1 wt.%Zr alloy. It was found that metastable phases played a very important role in controlling this behaviour. The alloy reached the 193 HV peak hardness aged for 6 h. Transmission electron microscopy was used to characterise the morphology of iy phases as main strengthening precipitates, and then the high-resolution transmission electron microscopy, combining with Transition Matrix calculation, was used to analysis the orientations and electron diffraction patterns of eta' precipitates. It was found that the eta' phases in four variants had only three different zone axis: [2 (4) over bar 23](eta'), [10 (1) over bar0] T and [(2) over tilde4 (2) over bar3](eta'), parallel to the [110](Al) direction of Al matrix when they were precipitated. By integrating the atomic coordinates, structure factors and double diffraction effect, a new diffraction patterns model under the [110](Al) zone axis was established, which was good in agreement with the experimental result. Simultaneously, Moire fringes analytical technique was also used to quantitatively verify the lattice parameters and orientation variants of eta' precipitates, and demonstrated that Moire fringes with about 0.7 nm spacing were the results of the interaction between the 0004(eta')/4000 (4) over bar (eta'), diffraction eta' of Ti' precipitates in variants 3/4 under the [10 (1) over bar0] y zone axis and the 1 (1) over bar (Al)/1 (1) over bar(1) over bar (Al) of Al matrix under the [110](Al) zone axis. Furthermore, the high-resolution transmission electron microscopy image simulation for Moire fringes of eta' precipitates in the Al matrix presented a good match with the experimental result. (C) 2014 Elsevier B.V. All rights reserved.

Five-fold Symmetry Structure Inhibiting the Growth of an Otherwise Perfect Η2 Phase in Al-Zn-Mg-Cu Alloys

Five-fold symmetry structure inhibiting the growth of an otherwise perfect η 2 phase in Al-Zn-Mg-Cu alloys

Icosahedral Ordering Induced by Cr in Al–Zn Alloy Liquid

First-principle investigation on the interfacial structure evolution of the δ'/θ'/δ' composite precipitates in Al-Cu-Li alloys

Fine precipitation scenarios of AlZnMg(Cu) alloys revealed by advanced atomic-resolution electron microscopy study Part I: Structure determination of the precipitates in AlZnMg(Cu) alloys

Precipitation and crystallographic relationships of nanosized η/η’ precipitates at S-Al interface in Al-Zn-Mg-Cu alloy

Interface Structures and Thickening Mechanisms of the Q′ and QP2 Phases for Al-Mg-Si-Cu Alloys

Growth Characteristics and Formation Mechanisms of Cu6Sn5 Phase at the Liquid-Sn0.7cu/(111)(cu) and Liquid-Sn0.7cu/(001)(cu) Joint Interfaces

Phase transition induced by synchroshear in Al-Zn-Mg-Cu alloy

Crystal structure and stability of phases in Mg-Zn alloys: A comprehensive first-principles study

Icosahedral quasicrystal structure of the Mg40Zn55Nd5 phase and its thermodynamic stability

Atomic-scale characterization of V-shaped interface structure of η 1 precipitates in Al–Zn–Mg alloy

Structural relationships among monoclinic and hexagonal phases and transition structures in Mg-Zn-Y alloys

Experimental and DFT characterization of η′ nano-phase and its interfaces in AlZnMgCu alloys

Formation mechanism of the quasicrystal in Al-Cu-Mg-Zn aluminum alloy resistance spot weld

Precipitation Behaviour of Al–Zn–Mg–Cu Alloy and Diffraction Analysis from Η′ Precipitates in Four Variants

The Crystal Structure of the Equilibrium Φ Phase in Mg–Zn–Al Casting Alloys

Precipitation in an Al-Zn-Mg-Cu alloy during isothermal aging: Atomic-scale HAADF-STEM investigation

Nucleation and evolution mechanism of precipitates during the initial aging stage in Al-Zn-Mg-Cu alloy

Formation of Icosahedral Quasicrystalline Phase in Zr-Al-Ni-Cu-M (M = Ag, Pd, Au or Pt) Systems

Interfacial Dislocation Induced Precipitation in a Mg−Gd−Zn−Zr Alloy