Abstract:This paper presents a digital background timing-skew calibration technique with high accuracy and bandwidth in time-interleaved (TI) analog-to-digital converters (ADCs). Compared with other calibration works, it features three highlights. Firstly, the proposed DCSD-based step-by-step and grouping calibration scheme can effectively improve the correction accuracy by minimizing the root mean square (RMS) value of the detected timing skews. Secondly, the linear compensation for a 13-taps FIR filter and the decimation-calibration-interpolation working pattern are used to expand the calibration effective bandwidth to the whole first Nyquist zone from different perspectives. Thirdly, the binary search is employed, instead of LMS algorithm, in order to meet the compensation requirement for FIR filter and improve the convergence speed and accuracy significantly in timing-skew detection. As a result, the proposed technique achieves the widest calibration bandwidth and higher accuracy compared to other fully digital calibration techniques while having the great convergence speed. Simulation model in MATLAB and FPGA-based hardware verification are employed to demonstrate its significant improvement on the performance and hardware overhead of the TI-ADCs. Finally, the proposed technique is employed in a 10-bit 2.5 GS/s 4-way TI-SAR ADC fabricated by standard CMOS 28nm process. The measurement results show that with the proposed technique, the SFDR and SNDR are improved by 18.9 and 17.9 dB at Nyquist frequency, respectively.

A Fully-Digital Calibration Algorithm for VCO-based ADC

Modeling of a 14-bit, 100-MS/s pipelined ADC with digital nonlinearity calibration

A 15-Bit, 5 MSPS SAR ADC with On-Chip Digital Calibration

A PVT Compensated Ring VCO with FVC-Assisted Digital Background Calibration

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

A Digital Background Calibration Circuit for Coarse-Fine Timing Mismatch in VCO-Based ADCs

A Code-Pattern-driven Digital Background Calibration Technique for SAR ADCs

Origin of Frequency-Dependent Distortion and Calibration for Ring Oscillator VCO ADCs

High-Speed and Time-Interleaved ADCs Using Additive-Neural-Network-Based Calibration for Nonlinear Amplitude and Phase Distortion

A Foreground Digital Calibration Algorithm for Time-Interleaved Adcs with Low Computational Complexity

A High Accuracy and Bandwidth Digital Background Calibration Technique for Timing Skew in TI-ADCs

A Comprehensive Digital Calibration for Pipelined ADCs Using Cascaded Nonlinearity Correction

A 0.04-Mm2 0.9-Mw 71-Db SNDR Distributed Modular AS ADC with VCO-based Integrator and Digital DAC Calibration

A 2.5 Khz 50.57 Db Linearized VCO ADC Using 6 Μm LTPS TFTs

A 12b ENOB, 2.5Mhz-Bw, 4.8mw VCO-based 0&#x2013;1 MASH ADC with Direct Digital Background Nonlinearity Calibration

Vco-Based Continuous-Time Sigma Delta Adc Based on A Dual-Vco-Quantizer-Loop Structure

An All−Digital Timing Mismatch Calibration Algorithm Based on Reference Channel for TIADC

A 14-Bit Pipelined ADC with Digital Background Nonlinearity Calibration.

A Foreground Digital Calibration by Switching Control Scheme for A 12-Bit SAR ADC

Linearity improvement base on digital foreground calibration algorithm for a ultra high-speed analog-to-digital converter

A 1.2 mW 67.5 dB SQDR VCO-based ΣΔ ADC with Non-linearity Cancellation Technique