Abstract:A comprehensive understanding of the thermal cracking behavior of hydrocarbon fuels is important for thermal protection applications and investigations into the combustion of thermally cracked fuels. In the present study, n-dodecane is selected as a surrogate for aviation kerosene and it is subjected to a series of thermal cracking experiments at supercritical pressure. According to variations in chemical heat sink, fuel-conversion rate, and gas-production rate, the thermal cracking of n-dodecane is divided into three regions: primary, secondary, and severe. In the primary cracking region, the fuel-conversion rate is lower than 13%, and the liquid products contain only chain alkanes and alkenes. Owing to the mass fraction of main products being proportional to the fuel-conversion rate, a one-step global reaction kinetics is constructed. The secondary cracking region is characterized by rapidly increasing chemical heat sink, fuel-conversion rates, and gas-production rates with increasing fuel temperature, and the appearance of monocyclic aromatic hydrocarbons (MAHs) and cycloalkenes. A kinetic model containing three reactions is proposed for this region. This also considers the thermal decomposition of chain alkanes and alkenes, which result in the formation of MAHs and cycloalkenes. Severe cracking is observed for fuel-conversion rates above 71% where a rapid increase in the concentration of monocyclic and polycyclic aromatic hydrocarbons (PAHs) occurs. The increasing rate of chemical heat sink slows in this region which is characterized by the formation of MAHs, PAHs, and coke. A three-dimensional numerical model is built for the primary and secondary cracking regions, taking the effects of the flow, heat transfer, and thermal cracking of n-dodecane into consideration. Predicted values for the outlet temperature, fuel-conversion rate, and distribution of the main species in all tested cases agree well with the experimental results, validating the numerical model and kinetics for the primary and secondary thermal cracking of n-dodecane.

The Mechanism of Ethanol Blending on the Variation of Chemical Heat Sink in N-Decane Thermal Cracking Process

Investigation on Thermal Properties of a Novel Fuel Blend and Its Diesel Engine Performance

Effects of Pressure on Heat Sink of N-Decane

Simplification of Pyrolytic Reaction Mechanism and Turbulent Heat Transfer of N-Decane at Supercritical Pressures

Modeling and simulation for n-decane cracking flow based on detailed reaction kinetics and complete real gas thermodynamics under supercritical pressure

Effect of Methanol and Ethanol on N-Decane Pyrolysis Process by ReaxFF Simulation and Experiment Validation

Experiment and Modeling on Thermal Cracking of N-Dodecane at Supercritical Pressure

Numerical Investigations on the Molecular Reaction Model for Thermal Cracking of n-Decane at Supercritical Pressures.

Coupling ReaxFF molecular dynamics with computational fluid dynamics on the enhanced heat sink of n-decane decomposition initiated by nitroethane in the regenerative cooling channels

Experimental and numerical investigations on n-decane thermal cracking at supercritical pressures in a vertical tube

Numerical Model Development and Validation for Hydrocarbon Fuel Supercritical Heat Transfer with Endothermic Pyrolysis

Study on the Physical and Chemical Characteristics of Ethanol-Diesel Blend Fuels

Experimental Study on the Mechanism of Water on Heat Sink Variation in Catalytic Partial Steam Reforming of Supercritical N-Decane

THERMODYNAMICS ON COUPLED CONVERSION OF BUTENE AND METHANOL TO ETHYLENE AND PROPYLENE

Research on Physical and Chemical Properties of the Ethanol-Diesel Blend Fuel

Blend Fuels of Ethanol and Diesel Concoction and Its Influence on Diesel Engine Performance

The effect of ethanol blended diesel fuels on emissions from a diesel engine

Molecular dynamics study on the kinematic viscosity, density and structure of fuel blends containing n-decane and biofuel compound of ethyl decanoate or ethyl dodecanoate

Densities and Viscosities of the Ternary Mixtures of Decalin (1) + n-Hexadecane (2)+1-Butanol (3) and Corresponding Binary Systems

Steam Cracking and EDC Furnace Simulation

Experimental Investigation and Modeling of Thermophysical Properties of Ethyl Decanoate at High Temperatures