Effective Strategies for Stabilizing Sulfur for Advanced Lithium–sulfur Batteries

Ogechi Ogoke,Gang Wu,Xianliang Wang,Anix Casimir,Lu Ma,Tianpin Wu,Jun Lu

DOI: https://doi.org/10.1039/c6ta07864h

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:This review focuses on recent developments in the last three years of various sulfur integration methods in lithium-sulfur batteries.

What problem does this paper attempt to address?

Effective Strategies For Stabilizing Sulfur For Advanced Lithium-Sulfur Batteries

Ogechi Ogoke,Gang Wu,Xianliang Wang,Anix Casimir,Lu Ma,Tianpin Wu,Jun Lu

DOI: https://doi.org/10.1039/c6ta07864h

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:The lithium-ion battery, with a relatively small energy density of similar to 250 W h kg(-1), has dominantly powered many devices requiring small energy demands. However, there remains a need for a cheaper and smaller type of battery with higher energy density for energy-intensive storage purposes in the automotive, aircraft, and household energy sectors. With its higher specific capacity (1675 mA h g(-1)) and lower costs, the lithium-sulfur (Li-S) battery represents the most promising next generation battery. The main focus of scientific inquiry surrounding Li-S batteries lies at the cathode, where sulfur chemically bonds to lithium. Current challenges pertaining to the high performance cathode such as the dissolution of sulfur into the electrolyte and electrode volume changes are highlighted. This review focuses on recent developments in the last three years of various sulfur integration methods at the cathode that result in improved electrochemical performance, increased energy density, cyclic stability, and a higher capacity over the mainstream lithium-ion battery. In particular, the most recent approaches were systematically examined and compared including the use of carbon and non-carbon composites to stabilize sulfur. Ideal material hosts for sulfur atoms in the cathode for outstanding Li-S batteries were outlined and thoroughly discussed. Critical understanding and relevant knowledge were summarized aiming to provide general guidance for rational design of high-performance cathodes for advanced Li-S batteries.
Advances in the Development of Single-Atom Catalysts for High-Energy-Density Lithium-Sulfur Batteries.

Ziwei Liang,Jiadong Shen,Xijun Xu,Fangkun Li,Jun Liu,Bin Yuan,Yan Yu,Min Zhu

DOI: https://doi.org/10.1002/adma.202200102

2022-01-01

Abstract:Although lithium-sulfur (Li-S) batteries are promising next-generation energy-storage systems, their practical applications are limited by the growth of Li dendrites and lithium polysulfide shuttling. These problems can be mitigated through the use of single-atom catalysts (SACs), which exhibit the advantages of maximal atom utilization efficiency (≈100%) and unique catalytic properties, thus effectively enhancing the performance of electrode materials in energy-storage devices. This review systematically summarizes the recent progress in SACs intended for use in Li-metal anodes, S cathodes, and separators, briefly introducing the operating principles of Li-S batteries, the action mechanisms of the corresponding SACs, and the fundamentals of SACs activity, and then comprehensively describes the main strategies for SACs synthesis. Subsequently, the applications of SACs and the principles of SACs operation in reinforced Li-S batteries as well as other metal-S batteries are individually illustrated, and the major challenges of SACs usage in Li-S batteries as well as future development directions are presented.
Kinetic Regulation Strategies in Lithium-Sulfur Batteries

JIAO Xun,TONG Cheng,LI Cunpu,WEI Zidong

DOI: https://doi.org/10.11949/0438-1157.20221071

2023-01-01

Abstract:Lithium-sulfur（Li-S） batteries are expected to be one of the candidates for next-generation highenergy-density batteries because of their ultra-high theoretical energy density（2600 Wh·kg-1）. However, it suffers from low sulfur utilization, rapid capacity fading, and the “lost effect” of lithium polysulfides（LiPSs）. These problems make the reaction kinetics of Li-S batteries sluggish, severely limiting their practical applications.Methods such as physical confinement and chemical adsorption can accelerate the redox reaction between sulfur,LiPSs, and Li2S, reduce the loss of LiPSs, and accelerate the kinetic process, which enable the battery with high energy density and long-cycle stability. Based on the overall electrochemical reaction process, this article reviews how materials used in recent years can facilitate the kinetic process, prevent the loss of LiPSs, and evaluate the corresponding strategies. The purpose of this review is to help guide the rational design of improved battery kinetics and the practical application of Li-S batteries.
The Royal Society of es for stabilizing sulfur for advanced lithium – sulfur batteries

Ogechi Ogoke,Gang Wu,Xianliang Wang,Anix Casimir,Lu Ma,Tianpin Wub,Jun Lu

2016-01-01

Abstract:The lithium-ion battery, with a relatively small energy density of 250 W h kg , has dominantly powered many devices requiring small energy demands. However, there remains a need for a cheaper and smaller type of battery with higher energy density for energy-intensive storage purposes in the automotive, aircraft, and household energy sectors. With its higher specific capacity (1675 mA h g ) and lower costs, the lithium–sulfur (Li–S) battery represents the most promising next generation battery. The main focus of scientific inquiry surrounding Li–S batteries lies at the cathode, where sulfur chemically bonds to lithium. Current challenges pertaining to the high performance cathode such as the dissolution of sulfur into the electrolyte and electrode volume changes are highlighted. This review focuses on recent developments in the last three years of various sulfur integration methods at the cathode that result in improved electrochemical performance, increased energy density, cyclic stability, and a higher capacity over the mainstream lithium-ion battery. In particular, the most recent approaches were systematically examined and compared including the use of carbon and non-carbon composites to stabilize sulfur. Ideal material hosts for sulfur atoms in the cathode for outstanding Li–S batteries were outlined and thoroughly discussed. Critical understanding and relevant knowledge were summarized aiming to provide general guidance for rational design of high-performance cathodes for advanced Li–S batteries.
A Novel Strategy for High-Stability Lithium Sulfur Batteries by in Situ Formation of Polysulfide Adsorptive-Blocking Layer

Liming Jin,Gaoran Li,Binhong Liu,Zhoupeng Li,Junsheng Zheng,Jim P. Zheng

DOI: https://doi.org/10.1016/j.jpowsour.2017.04.059

IF: 9.2

2017-01-01

Journal of Power Sources

Abstract:Lithium sulfur (LiS) batteries are one of the most promising energy storage devices owing to their high energy and power density. However, the shuttle effect as a key barrier hinders its practical application by resulting in low coulombic efficiency and poor cycling performance. Herein, a novel design of in situ formed polysulfide adsorptive-blocking layer (PAL) on the cathode surface was developed to tame the polysulfide shuttling and promote the cycling stability for LiS batteries. The PAL is consisted of La2S3, which is capable to chemically adsorb polysulfide via the strong interaction of LaS bond and SS bond, and build an effective barrier against sulfur escaping. Moreover, the La2S3 is capable to suppress the crystallization of Li2S and promote the ion transfer, which contributes to the reduced internal resistance of batteries. Furthermore, the by-product LiNO3 simultaneously forms a stable anode solid and electrolyte interface to further inhibit the polysulfide shuttle. By this simple and convenient method, the resultant LiS batteries achieved exceptional cycling stability with an ultralow decay rate of 0.055% since the 10th cycle.
Lithium–sulfur Batteries: from Liquid to Solid Cells

Zhan Lin,Chengdu Liang

DOI: https://doi.org/10.1039/c4ta04727c

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:This review article gives insights on the current status and future perspectives of the lithium–sulfur battery technology.
Study on Lithium-Sulfur Batteries

Yong-Gang Wang,Lina Wang,Shouyi Yuan,Yong-Yao Xia

DOI: https://doi.org/10.1149/ma2016-02/5/775

2016-01-01

ECS Meeting Abstracts

Abstract:Lithium-Sulfur (Li-S) batteries have recently raised worldwide attention owning to the high specific theoretical energy density of sulfur (2600Wh kg-1), the low cost and the wide availability of sulfur. However, the practical application of lithium-sulfur batteries has been hindered by several challenges, such as the shuttling of polysulfide intermediates, the large volume expansion of sulfur during charge/discharge and the dendrites formation on Li-anode. In this talk, we will introduce our recent investigation about Li-S batteries, including physical and chemical immobilization of sulfur to improve cycling stability, segregator optimization to minimize the shuttling effect and design of ionic liquids based electrolyte system to reduce the self-discharge. Finally, we introduce a lithium-ion sulfur battery based on a Li2S cathode using a dual-phase electrolyte (Li2S/electrolyte-1/LISICON/electrolyte-2/Li) and then replaced the Li anode with Al and graphite, which demonstrates a proof of concept of metal Li free Li-ion Sulfur battery. Reference [1] S.Y. Yuan, Z.Y. Guo, L.N. Wang, S. Hu, Y. G. Wang*, Y.Y. Xia*, Adv. Sci. 2015, 2: 1500071. [2] S.Y. Yuan, J.W. Bao, L.N. Wang, Y.Y. Xia, D.G. Truhlar*, Y.G. Wang*, Adv. Energy Mater., 2015 , 1501733. [3] L.N. Wang, J.Y. Liu, S. Haller, Y.G. Wang*, Y.Y. Xia*, Chem. Commun., 2015, 51: 6996. [4] L.N. Wang, J.Y. Liu, S.Y. Yuan, Y.G. Wang*, Y.Y. Xia*, Energy Environ. Sci., 2016, 9: 224. [5] L.N. Wang, Y.G. Wang*, Y.Y. Xia*, Energy Environ. Sci., 2015, 8: 1551.
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries

Hong-Jie Peng,Jia-Qi Huang,Xin-Bing Cheng,Qiang Zhang

DOI: https://doi.org/10.1002/aenm.201700260

IF: 27.8

2017-01-01

Advanced Energy Materials

Abstract:Owing to high specific energy, low cost, and environmental friendliness, lithium-sulfur (Li-S) batteries hold great promise to meet the increasing demand for advanced energy storage beyond portable electronics, and to mitigate environmental problems. However, the application of Li-S batteries is challenged by several obstacles, including their short life and low sulfur utilization, which become more serious when sulfur loading is increased to the practically accepted level above 3-5 mg cm(-2). More and more efforts have been made recently to overcome the barriers toward commercially viable Li-S batteries with a high sulfur loading. This review highlights the recent progress in high-sulfur-loading Li-S batteries enabled by hierarchical design principles at multiscale. Particularly, basic insights into the interfacial reactions, strategies for mesoscale assembly, unique architectures, and configurational innovation in the cathode, anode, and separator are under specific concerns. Hierarchy in the multiscale design is proposed to guide the future development of high-sulfur-loading Li-S batteries.
A new high-capacity and safe energy storage system: lithium-ion sulfur batteries

Xin Liang,Jufeng Yun,Yong Wang,Hongfa Xiang,Yi Sun,Yuezhan Feng,Yan Yu

DOI: https://doi.org/10.1039/c9nr05670j

IF: 6.7

2019-11-07

Nanoscale

Abstract:Lithium-ion sulfur batteries as a new energy storage system with high capacity and enhanced safety have been emphasized, and their development has been summarized in this review. The lithium-ion sulfur battery applies elemental sulfur or lithium sulfide as the cathode and lithium-metal-free materials as the anode, which can be divided into two main types. One is anode-type, where elemental sulfur is applied as the cathode, and the anode provides lithium ions. The other one is cathode-type, where lithium sulfide as the cathode provides lithium ions, and lithium-metal-free materials (e.g., graphite, silicon/carbon) function as the anode. Recently, some new lithium-ion sulfur battery systems have also been proposed, and are discussed in this review as well. The lithium-ion sulfur batteries not only maintain the advantage of high energy density because of the high capacities of sulfur and lithium sulfide, but also exhibit the improved safety of the batteries due to a non-lithium-metal in the anode. This review paper aims to track the recent progress in the development of lithium-ion sulfur batteries and summarize the challenges and the approaches for improving their electrochemical performances, including the lithiation methods to prepare lithium-metal-free anodes in anode-type lithium-ion sulfur batteries and the lithium sulfide cathode modification approaches in cathode-type lithium-ion sulfur batteries. Furthermore, the challenges and perspectives for future research and commercial applications have also been enumerated.
Molecular Engineering of Sulfur‐providing Materials for Optimized Sulfur Conversion in Li‐S Chemistry

Long Jiao,Heng Li,Chen Zhang,Hao Jiang,Shuo Yang,Dengkun Shu,Chenyang Li,Bowen Cheng,Quanhong Yang,Wenjun Zhang

DOI: https://doi.org/10.1002/eom2.12262

2022-01-01

EcoMat

Abstract:The practical implementation of lithium-sulfur (Li-S) batteries is greatly hampered by the low sulfur utilization and limited battery lifespan stemming from the complexity of the sulfur conversion reactions. As a core element in Li-S chemistry, the intrinsic physiochemical properties of sulfur have predominant impacts on the final battery performance, and thus rational engineering of its structure at the molecular level may provide ample possibilities to optimize the sulfur conversion behaviors and hence to promote the commercialization of Li-S technology. This review summarizes the recent advancements in tailoring the electrochemical performance of Li-S batteries through engineering the molecular structures of sulfur-providing materials themselves, such as by heteroatom doping, skeleton grafting, and construction of polysulfides-based functional intermediates. Some new-type inorganic sulfur-equivalent active molecules with beneficial electrochemical properties for cathode application are also included. Finally, the perspectives on the challenges of molecular engineering of sulfur for achieving advanced Li-S batteries are discussed.
Strategies toward High-Loading Lithium–Sulfur Batteries

Tao Wang,Jiarui He,Xin-Bing Cheng,Jian Zhu,Bingan Lu,Yuping Wu

DOI: https://doi.org/10.1021/acsenergylett.2c02179

IF: 22

2022-11-22

ACS Energy Letters

Abstract:A high sulfur loading is an essential prerequisite for the practical application of lithium–sulfur batteries. However, it will inevitably exacerbate the shuttling effect and slow down the polysulfide conversion kinetics. To obtain desirable electrochemical performance at a high level of sulfur loading, the adsorption and catalysis dual strategies are widely reported to solve the severe shuttling effect and sluggish reaction kinetics issues. This review mainly summarizes the research on lithium–sulfur batteries with a high sulfur loading (>5 mg cm–2) based on adsorption–catalysis dual promotion strategies. Specifically, we review the principle and technical challenges for lithium–sulfur batteries and recent advancements in electrode materials with adsorption and catalysis design, as well as the potential approaches and suggestions for constructing next-generation lithium–sulfur batteries at a high level of sulfur loading. This review will provide practical guidance for lithium–sulfur batteries with high energy density and power density under a high sulfur loading and offer a better reference for researchers to choose adsorbents and catalysts.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry
Research Progress in Lithium Sulfur Battery

Wan Wenbo,Pu Weihua,Ai Desheng

DOI: https://doi.org/10.3969/j.issn.1008-4800.2017.22.067

2013-01-01

Progress in chemistry

Abstract:Lithium-sulfur (Li-S) battery is a promising electrochemical energy storage system that has high theoretical energy density of 2600 Wh center dot kg(-1), which is 3 to 5 times that of Li-ion batteries. It has attracted more and more attentions in recent years. Great efforts have been made to improve the stability of electrode structure, the utilization efficiency of sulfur in the cathode and the enhancement of cycle life of the battery. In this paper, the recent progress of the lithium-sulfur battery is reviewed from four aspects: modification of sulfur-based composite cathode material, electrolytes, protection of lithium anode and design of lithium-sulfur cell configurations. The main factors on the specific capacity and cycle stability of the lithium-sulfur battery are analyzed. The prospects and development trends on lithium-sulfur battery are also discussed.
(Invited) Stabilizing the Electrodes and Interfaces in Lithium-Sulfur Batteries

Arumugam Manthiram

DOI: https://doi.org/10.1149/ma2024-01129mtgabs

2024-08-09

ECS Meeting Abstracts

Abstract:As the electrification of transportation sector and grid storage of electricity produced from renewable sources like solar and wind are rapidly evolving, cost, sustainability, and supply chain challenges will become the dominant issue. Lithium-sulfur batteries offer significant sustainability and cost advantages compared to the currently used lithium-ion batteries as sulfur is abundant and inexpensive and offers an order of magnitude higher capacity than the oxide cathodes. However, the commercialization of lithium-sulfur batteries is met with a few challenges, such as poor cycle life in practical cells. These challenges originate from the poor electronic and ionic conduction in sulfur and its discharged products, polysulfide shuttle, and poor cyclability of lithium-metal anode. To overcome some of these difficulties, generally a large amount of conductive carbon and liquid electrolyte are added to the cell; they enhance the cycle life, but drastically lower the practical energy density and make the lithium-sulfur batteries uncompetitive with lithium-ion batteries. To overcome the above challenges, this presentation will focus on optimizing sulfur and lithium sulfide cathodes, incorporation of electrocatalysts into the cathode to enhance sulfur redox, development of advanced electrolytes, incorporation of additives into the cathode and electrolyte to stabilize the cathode-electrolyte and anode-electrolyte interfaces, anode-free cells that eliminate the handling of thin lithium-metal foils, while keeping the sulfur loading and electrolyte/sulfur ratio at a practically accepted level. The improvements achieved and the mechanisms involved in the performance improvement will be discussed based on in-depth characterization data obtained with time-of-flight secondary ion spectrometry (TOF-SIMS), x-ray photoelectron spectroscopy (XPS), nuclear magnetic resonance (NMR) spectroscopy, etc .
Stabilization Strategies of Lithium Metal Anode Toward Dendrite‐Free Lithium‐Sulfur Batteries

Zhiyuan Liu,Luyang Sun,Xianyu Liu,Qiongqiong Lu

DOI: https://doi.org/10.1002/chem.202402032

2024-08-19

Chemistry - A European Journal

Abstract:Lithium‐sulfur (Li‐S) batteries are considered as a most promising rechargeable lithium metal batteries because of their high energy density and low cost. However, the Li‐S batteries mainly suffer the capacity decay issue caused by the shutting effect of lithium polysulfides and the safety issues arising from the Li dendrites formation. This review outlines the current issues of Li‐S batteries. Furthermore, we comprehensively summarized the challenges encountered by Li anode in Li‐S batteries, such as the heterogeneous deposition of the Li anode, the unstable solid electrolyte interface (SEI) layer, and volume expansion. Moreover, research progresses in the stabilization strategies of Li anodes (physical approaches, optimization of electrolyte, surface protection layer, and design of current collector) is discussed in detail. Lastly, the remaining challenges and future research directions of Li metal anode stabilization in Li‐S batteries are also present.

chemistry, multidisciplinary
Advances in High Sulfur Loading Cathodes for Practical Lithium‐Sulfur Batteries

Mingyue Wang,Zhongchao Bai,Ting Yang,Chuanhao Nie,Xun Xu,Yunxiao Wang,Jian Yang,Shixue Dou,Nana Wang

DOI: https://doi.org/10.1002/aenm.202201585

IF: 27.8

2022-08-04

Advanced Energy Materials

Abstract:The review mainly focuses on the design of high sulfur loading cathodes. It summarizes the major problems and challenges facing high sulfur loading LiS batteries and proposes some effective approaches to achieve high‐performance LiS batteries with high sulfur loading cathodes, which may guide the design of high actual energy density LiS batteries. Lithium‐sulfur batteries hold great potential for next‐generation energy storage systems, due to their high theoretical energy density and the natural abundance of sulfur. Although much progress has been achieved recently, the low actual energy density of LiS batteries is still the key challenge in implementing their practical applications. Because the energy density greatly depends on the areal capacity of their sulfur cathodes, the sulfur content and sulfur loading play an important role in meeting the conditions necessary for practical applications. Therefore, escalating the areal capacity of sulfur cathodes is essential to promote LiS technology from laboratory‐scale devices to industrial (or commercial) systems. In this review, the recent progress in high sulfur loading of LiS batteries (>4 mg cm−2) is highlighted from various aspects, including sulfur hosts, binders, separators, and interlayers. In particular, sulfur hosts derived from carbon, polymer, transition metal oxide/ sulfide, metal‐organic framework, and other novel materials, which can promote high sulfur loading, are discussed in detail. Moreover, unique free‐standing structures and configurational innovation of separators and interlayers are overviewed. Based on the current achievements, future efforts for developing high‐loading LiS batteries are proposed to pave the way for their commercial applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes

Quan Pang,Xiao Liang,Chun Yuen Kwok,Linda F. Nazar

DOI: https://doi.org/10.1038/nenergy.2016.132

IF: 56.7

2016-09-01

Nature Energy

Abstract:Amid burgeoning environmental concerns, electrochemical energy storage has rapidly gained momentum. Among the contenders in the ‘beyond lithium’ energy storage arena, the lithium–sulfur (Li–S) battery has emerged as particularly promising, owing to its potential to reversibly store considerable electrical energy at low cost. Whether or not Li–S energy storage will be able to fulfil this potential depends on simultaneously solving many aspects of its underlying conversion chemistry. Here, we review recent developments in tackling the dissolution of polysulfides — a fundamental problem in Li–S batteries — focusing on both experimental and computational approaches to tailor the chemical interactions between the sulfur host materials and polysulfides. We also discuss smart cathode architectures enabled by recent materials engineering, especially for high areal sulfur loading, as well as innovative electrolyte design to control the solubility of polysulfides. Key factors that allow long-life and high-loading Li–S batteries are summarized.

materials science, multidisciplinary,energy & fuels
Advances in sulfide-based all-solid-state lithium-sulfur battery: Materials, composite electrodes and electrochemo-mechanical effects

Jiabao Gu,Haoyue Zhong,Zirong Chen,Jingwen Shi,Zhengliang Gong,Yong Yang

DOI: https://doi.org/10.1016/j.cej.2022.139923

IF: 15.1

2022-11-06

Chemical Engineering Journal

Abstract:Sulfide-based all-solid-state lithium-sulfur batteries (ASSLSBs) have recently attracted great attention. The "shuttle effect" caused by the migration of polysulfides in conventional liquid lithium-sulfur batteries could be eliminated. Therefore, the utilization of active materials and cycling stability, as well as battery safety, can be significantly improved. Impressive progress has been made in the research of materials for sulfide-based ASSLSBs, including sulfide solid-state electrolytes (SSEs), sulfur-based cathode materials, and anode materials. However, challenges such as scalable fabrication of large-scale, high-areal capacity composite electrodes and robust, high-conductivity thin SSE films, as well as the serious electrochemo-mechanical issues in sulfur-based electrodes, still hinder the practical application and development of sulfide-based ASSLSBs. In this review, recent research progress on sulfide-based ASSLSBs materials is summarized and discussed. In addition, the challenges in the practical application of sulfide-based ASSLSBs, such as scalable composite electrodes/SSE membranes fabrication and complicated electrochemo-mechanical coupling effects, are also systematically overviewed.
Advances in Understanding and Regulation of Sulfur Conversion Processes in Metal-Sulfur Batteries

Fangyi Shi,Jingya Yu,Chunhong Chen,Shu Ping Lau,Wei Lv,Zheng-Long Xu

DOI: https://doi.org/10.1039/d2ta02217f

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:Lithium-sulfur batteries (LSBs) have attracted intensive attention as promising next-generation energy storage systems, due to the high energy density and low cost of sulfur cathodes. Despite the substantial progress in improving LSBs' performance, their wide implementation still suffers from great challenges, including the difficulties in achieving practically high energy density with long cycle life and the concerns about the limited lithium resources. The former issue mainly arises from the insufficient understanding of the mechanics of the complex lithium-sulfur redox reactions, while the latter trigger the exploration of a range of new metal-sulfur systems, such as sodium-sulfur, potassium-sulfur, magnesium-sulfur, calcium-sulfur, and aluminum-sulfur batteries. These lithium-free metal-sulfur batteries (MSBs) have the potential to offer higher energy density or/and lower battery costs. The fundamental understanding and rational regulation of effective metal-sulfur conversion reactions are crucial for developing advanced and emerging MSBs. Herein, this work aims to overview the state-of-the-art progress in circumventing these issues of MSBs, in terms of working mechanisms, key factors determining the electrochemical behavior and battery performance. Advanced in situ characterization techniques used to disclose the sulfur conversion mechanisms are also elaborately discussed. Conclusions and perspectives for the future research direction in MSBs are proposed.
A Chemically Stabilized Sulfur Cathode for Lean Electrolyte Lithium Sulfur Batteries

Chao Luo,Enyuan Hu,Karen J. Gaskell,Xiulin Fan,Tao Gao,Chunyu Cui,Sanjit Ghose,Xiao-Qing Yang,Chunsheng Wang

DOI: https://doi.org/10.1073/pnas.2006301117

IF: 11.1

2020-01-01

Proceedings of the National Academy of Sciences

Abstract:Significance Sulfur is a promising cathode material for rechargeable lithium batteries due to its high capacity, low cost, abundance, and high sustainability. However, lithium sulfur batteries suffer from poor cycle life and low energy density under lean electrolyte conditions because of the dissolution of lithium polysulfide intermediates. Here, we report that the chemical bonding between sulfur and carbon/oxygen in an oxygen-rich dense carbon host can stabilize sulfur and improve the stability of lean electrolyte lithium sulfur batteries. This work opens up a way to develop chemical bonding-stabilized sulfur materials for stable and high-energy lithium sulfur batteries.
A review on lithium-sulfur batteries: Challenge, development, and perspective

Qinjun Shao,Shengdong Zhu,Jian Chen

DOI: https://doi.org/10.1007/s12274-022-5227-0

IF: 9.9

2023-01-06

Nano Research

Abstract:Lithium-sulfur (Li-S) battery is recognized as one of the promising candidates to break through the specific energy limitations of commercial lithium-ion batteries given the high theoretical specific energy, environmental friendliness, and low cost. Over the past decade, tremendous progress have been achieved in improving the electrochemical performance especially the lifespan by various strategies mainly concentrated on the sulfur cathodes. In this review, the fundamental electrochemistry of sulfur cathode and lithium anode is revealed to understand the current dilemmas. And the advances achieved through diverse strategies are comprehensively summarized, which involves lithium polysulfides (LiPSs) limitation, sulfur redox reaction regulation and electrocatalysis in sulfur cathode and artificial solid electrolyte interface (SEI), electrolyte design, and structured anode in lithium anode. Additionally, the differences between laboratory level coin cells and actual pouch cells need to be addressed that only few reports on practical Li-S pouch cell are available due to the unexpected problems on both sulfur cathode and lithium anode which are masked at lithium and electrolyte excess. Lastly, the challenges and perspective toward the practical Li-S batteries are also offered.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology

Effective Strategies for Stabilizing Sulfur for Advanced Lithium–sulfur Batteries

Effective Strategies For Stabilizing Sulfur For Advanced Lithium-Sulfur Batteries

Advances in the Development of Single-Atom Catalysts for High-Energy-Density Lithium-Sulfur Batteries.

Kinetic Regulation Strategies in Lithium-Sulfur Batteries

The Royal Society of es for stabilizing sulfur for advanced lithium – sulfur batteries

A Novel Strategy for High-Stability Lithium Sulfur Batteries by in Situ Formation of Polysulfide Adsorptive-Blocking Layer

Lithium–sulfur Batteries: from Liquid to Solid Cells

Study on Lithium-Sulfur Batteries

Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries

A new high-capacity and safe energy storage system: lithium-ion sulfur batteries

Molecular Engineering of Sulfur‐providing Materials for Optimized Sulfur Conversion in Li‐S Chemistry

Strategies toward High-Loading Lithium–Sulfur Batteries

Research Progress in Lithium Sulfur Battery

(Invited) Stabilizing the Electrodes and Interfaces in Lithium-Sulfur Batteries

Stabilization Strategies of Lithium Metal Anode Toward Dendrite‐Free Lithium‐Sulfur Batteries

Advances in High Sulfur Loading Cathodes for Practical Lithium‐Sulfur Batteries

Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes

Advances in sulfide-based all-solid-state lithium-sulfur battery: Materials, composite electrodes and electrochemo-mechanical effects

Advances in Understanding and Regulation of Sulfur Conversion Processes in Metal-Sulfur Batteries

A Chemically Stabilized Sulfur Cathode for Lean Electrolyte Lithium Sulfur Batteries

A review on lithium-sulfur batteries: Challenge, development, and perspective