Abstract:Needs for energy storage devices in modern-day applications such as electric vehicles and other high energy consuming portable electronics make the Lithium sulfur batteries (LSBs) to be one of the most attractive types since they offer a high theoretical energy density (2600 Wh kg -1 ), which is about an order of magnitude higher than the theoretical specific capacity of the lithium ion batteries. In addition, Sulfur is one of the most abundant materials in nature and moreover, a non-toxic element which makes the lithium sulfur battery a suitable candidate for commercialization. However, obstacles to overcome include the loss of active sulfur due to various phenomena mainly represented by polysulfide diffusion and reactivity on the lithium anode. Another serious issue observed in so many ways is the low electronic conductivity of Sulfur and its products such as Li 2 S as a result of cycling. These problems are often exacerbated at higher sulfur loading and lower electrolyte to sulfur ratios (E/S). One way to increase the sulfur loading is to increase the thickness of the cathode which in return increases the risk of low utilization of active material because of the high thickness and low wettability by electrolyte. Another way is to increases the ratio of the sulfur in respect to conductive host material without increasing the thickness of the cathode. By doing so, sulfur is going to fill all the pores existing in the host material and therefore, this structure cannot provide enough volume expansion during discharge process and as a result, the cathode structure may collapse and the whole cell fail. Therefore, to come up with a high performance and stable battery during cycling, there is no doubt that we have to focus on the structure of the cathode and the host material to effectively confine the sulfur and produced polysulfide and at the same time, alleviate the way of the electron transfer through the conductive network. In this research, we investigate some of the most influential parameters mainly associated with the morphology of the cathode to improve capacity retention. Optimizing the sulfur loading, E/S content, pore structure and pore volume, and the thickness of the cathode lead to an overarching understanding of the physical transitions that occur during the discharge and charge operation of the battery. In addition, various electrochemical testing to evaluation the loss of activity of the cathode surface is also carried it to correlate to the proposed physical model.

Strategies toward High-Loading Lithium–Sulfur Batteries

Advances in High Sulfur Loading Cathodes for Practical Lithium‐Sulfur Batteries

Strategies toward High‐Loading Lithium–Sulfur Battery

Kinetic Regulation Strategies in Lithium-Sulfur Batteries

Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries

Strategies on Enabling High Areal Sulfur Loading in Lithium Sulfur Batteries

Effective Strategies For Stabilizing Sulfur For Advanced Lithium-Sulfur Batteries

Catalytic materials for lithium-sulfur batteries: mechanisms, design strategies and future perspective

Lithium-Sulfur Batteries: Review on High-Loading and High-Energy Lithium-Sulfur Batteries (Adv. Energy Mater. 24/2017)

Promoting the Transformation of Li 2 S 2 to Li 2 S : Significantly Increasing Utilization of Active Materials for High-Sulfur-Loading Li – S Batteries

Catalytic Effects in Lithium–Sulfur Batteries: Promoted Sulfur Transformation and Reduced Shuttle Effect

Atomic Interlamellar Ion Path in High Sulfur Content Lithium‐Montmorillonite Host Enables High‐Rate and Stable Lithium–Sulfur Battery

Designing metal sulfide-based cathodes and separators for suppressing polysulfide shuttling in lithium-sulfur batteries

Adsorption‐Catalysis Design in the Lithium‐Sulfur Battery

Stable lithium-sulfur batteries with high sulfur content fabricated by ultralight ochroma lagopus-derived carbon with dopamine shell as sulfur host

New approaches for high energy density lithium-sulfur battery cathodes

Synergistic Interfacial Optimization for High-Sulfur-Content All-Solid-State Lithium-Sulfur Batteries

Unveiling the Pivotal Parameters for Advancing High Energy Density in Lithium‐Sulfur Batteries: A Comprehensive Review

Lithium Sulfide Batteries: Addressing the Kinetic Barriers and High First Charge Overpotential

Design of coatings for sulfur‐based cathode materials in lithium‐sulfur batteries: A review

Promoting the Transformation of Li2S2 to Li2S: Significantly Increasing Utilization of Active Materials for High‐Sulfur‐Loading Li–S Batteries