Abstract:Lithium–sulfur (Li–S) batteries have been recognized as a promising energy technology to power stationary and portable electronic devices and electrical vehicles, since the discovery in the 1960s.1 The typical reactions entail Li→Li+ + e− at the anode and S + 2e− → S2− at the cathode, with an overall reaction of 2Li + S→Li2S. Li–S batteries in general exhibit multiple merits. (i) Li–S batteries can deliver a theoretical energy density of 2567 Wh kg−1 that is nearly 10-fold higher than those of conventional Liion batteries (LIBs).3,4 For instance, an energy density of about 180 Wh kg−1 is usually observed for LiCoO2/C battery, 210 Wh kg−1 for LiFePO4/C battery, 200 Wh kg −1 for LiMnO4/C battery, and about 260 Wh kg −1 for LiNi1/3Mn1/3Co1/3/C battery. 5,6 This is because of the high specific capacity of sulfur (1672 mAh g−1), which can meet the ever-increasing demand of portable electronic devices and electrical vehicles.7–9 (ii) Sulfur is one of the most abundant elements on the earth’s crust, and more than 70 million tons of elemental sulfur are annually produced as a by-product from hydrodesulfurization in petroleum refining processes, coal desulfurization, etc.10,11 (iii) Sulfur is a low-cost natural resource and readily accessible.12,13 (iv) Sulfur is also environmentally compatible because of its low toxicity and low impacts to the environment.9,14–16 However, large-scale commercialization of the Li–S battery technology is greatly impeded by a series of challenging issues, which are mostly correlated with the cathode (Scheme 1). These include (i) poor electrical conductivity of sulfur and polysulfides (∼5× 10−30 S cm−1 at 25 ∘C),17–19 resulting in low specific capacity, low Coulombic efficiency, low utilization of active sulfur, and low charge–discharge rate performance; (ii) rapid mechanical degradation of cathode due to large volume expansion (up to 80%) of sulfur after complete lithiation; and (iii) dissolution of lithium polysulfides (Li2Sx, 4≤ x≤ 8) into organic electrolytes and the subsequent so-called “shuttle” effects, which results in uncontrollable sulfide deposition on the anode of lithium metal, lowering the Coulombic efficiency, and causing rapid capacity attenuation.20–23 To mitigate these issues, a number of strategies have been developed and reported in recent literatures, mostly based on physical and/or chemical confinement of sulfur in a conductive matrix (Scheme 1). Therefore, in this article, we will summarize recent progress in the design and engineering of effective cathodes for Li–S battery that entails mostly physical and chemical confinements.

Molecular Engineering of Sulfur‐providing Materials for Optimized Sulfur Conversion in Li‐S Chemistry

Molecular Electrocatalysts in Lithium‐Sulfur Batteries

Sulfurization of transition metal inorganic electrocatalysts in Li-S batteries

Enhanced catalysis LiS<sub>3</sub> of radical-to-polysulfide interconversion <i>via</i> increased sulfur vacancies in lithium-sulfur batteries

Design and modification of metal sulfide-based catalysts for lithium-sulfur batteries

Structural Engineering of Cathode Materials for Lithium–Sulfur Batteries

Catalytic Engineering for Polysulfide Conversion in High-Performance Lithium-Sulfur Batteries

Effective Strategies For Stabilizing Sulfur For Advanced Lithium-Sulfur Batteries

Lithium–Sulfur Battery Cathode Design: Tailoring Metal‐Based Nanostructures for Robust Polysulfide Adsorption and Catalytic Conversion

Optimizing Redox Reactions in Aprotic Lithium–Sulfur Batteries

Tunable MOFs derivatives for stable and fast sulfur electrodes in Li-S batteries

Advances in High Sulfur Loading Cathodes for Practical Lithium‐Sulfur Batteries

Promoting the Transformation of Li2 S2 to Li2 S: Significantly Increasing Utilization of Active Materials for High-Sulfur-Loading Li-S Batteries

Small Molecules, Great Powers: Chemistry of Small Organo‐Chalcogenide Molecules in Rechargeable Li‐Sulfur Batteries

Promoting the Transformation of Li2S2 to Li2S: Significantly Increasing Utilization of Active Materials for High‐Sulfur‐Loading Li–S Batteries

An Endogenous Prompting Mechanism for Sulfur Conversions Via Coupling with Polysulfides in Li-S Batteries

Advances in Understanding and Regulation of Sulfur Conversion Processes in Metal-Sulfur Batteries

Catalytic materials for lithium-sulfur batteries: mechanisms, design strategies and future perspective

Structure engineering of cathode host materials for Li–S batteries

Material design and structure optimization for rechargeable lithium-sulfur batteries

Molecular Structure-Controlled Synthesis of Sulfur-Containing Polymers for Rechargeable Li-S Batteries